Very nice Lee! I'm looking at getting an M4 this summer, also with a Magpul MOE setup. :)

Holy shit - how've have you been?

It was a productive lunch hour. Love working from home. Will need a riser mount for the long range scope.

Nice weapon, Lee. :dthumb:
Gotta let us know how it shoots!

Been good Lee! I'm on FB most of the time. :)

BTW my new carry gun. Also getting back into IDPA/USPSA shooting again. :)

http://i18.photobucket.com/albums/b1...r/DSC_2553.jpg

That was pretty cool.

Fuckin' A right it was... but what I really want to see is what was happening downrange.
They should have had another camera running to show that and either windowed it in or tacked it on at the end.

Hehehe your name is still cum dumpser

I've got a buddy at work offering to sell me his .38 special for $200. It's a Rossi M 351 w/ 2" barrel. He's only fired 39 rounds through it and bought it brand new. Thoughts?

$230 new for the 3"

http://www.academy.com/index.php?pag...358-03613-4211

Finished building my AR15. Since everyone will ask for specs, here they are:

DPMS lower receiver
BCM upper receiver - 16" mid length, 1/7 twist, chambered for .223 and 5.56
Ambidextrous safety since I'm left handed. :D
Magpul flip-up rear sight
Magpul stock and grip
Magpul MOE handguards

This covers the important stuff I think. I have a different trigger guard to put in, but I need to get some different punches first. I also want to toss a scope on it for some long distance shooting, but I figure I'll get proficient with the iron sights first.

Now on with the pics!

http://i467.photobucket.com/albums/r...xman1k/AR4.jpg

http://i467.photobucket.com/albums/r...xman1k/AR3.jpg

http://i467.photobucket.com/albums/r...xman1k/AR2.jpg

http://i467.photobucket.com/albums/r...xman1k/AR1.jpg

little late but......

why is he selling it after so few rounds?
can you try it out?
price doesn't seem terrible I would only be concerned with why he is selling.
you save $30 and no paperwork, not a bad thing.

if he lets you try it out run a full box of shells through it. my Taurus for the first couple boxes would "bind" up after 20 shots or so. build up in the revolver made it hard to rotate to the next shell. after a few boxes and some good cleanings, no more issues.

:dthumb:

Fuck yeah.

Very nice. Now, can you stop fucking around and buy a CZ?

looks like a great little gun. Which trigger did you use? Being a Lefty myself I will probably switch my ARs over to the Ambi Safety. I don't know if you have tried them or not but my last 223 build was using a Stag Left Handed upper Receiver and Le left handed bolt, Now CMMG is producing a Ambi Upper but as of this moment I think you still have to use the Stag Left Handed Bolt if you want to go that way.

Thanks! Just using the stock mil-spec trigger right now. A buddy of mine has a Geissele (I think) trigger that's been worked over that he has offered to me for a price of course. LOL. I do like the ambi safety. I've not tried a full on left handed AR. I'm so used to conquering and overcoming the right handed world that I didn't even think about it.

Just picked this up today:
https://lh4.googleusercontent.com/_e...0/DSCN0890.JPG

https://lh3.googleusercontent.com/_e...0/DSCN0891.JPG

Nice Kimber. Are you going to carry it?

Of course.

He was selling because he wanted a semi-auto and wanted to use the money to go towards one. He let me borrow it and I put many rounds through it. My dad has a Colt snubby .38 special, which I also borrowed. I took both guns out at the same time to compare. While I liked the lighter trigger pull of the Colt, along with the fact it is a six shooter, instead of Rossi's five. However, the Rossi has a hammer lock and the Colt doesn't. Since I have a 6 year old, I figured it would be best to get the Rossi, because she can't unlock the hammer, even if she could find the gun.

Didn't know we had ago many lefties here. I'm a lefty too...but I shoot rifle and shotgun right handed.

buddies m4

http://vimeo.com/18365811

My haul for April 2011: 1949 SW Military Police 4" .38 Special, Colt Agent .38 Special, Colt Delta Elite 10mm and Stoeger Cougar .45ACP.

http://i50.photobucket.com/albums/f3...yPolice002.jpg
http://i50.photobucket.com/albums/f3...ltAgent003.jpg
http://i50.photobucket.com/albums/f3...taElite010.jpg
http://i50.photobucket.com/albums/f3...ayonets002.jpg

I love those wheel Guns especially the Agent! I still have a couple boxes of 10mm around here from a Delta I sold a few years ago.

I bought that Delta Elite on a whim more than anything. Right now accuracy isn't all that impressive, though it depends on the ammo. Blazer groupings are outrageously large but Double Tap ammo is very respectable. The gun is used, of course, and seemingly stock other than the long trigger which doesn't help me and the Briley bushing which I'm not sure if it screwed up accuracy or what. I'll get some different brands of ammo to try it out some more before switching back to a standard barrel bushing.

That pistol bayonet is completely absurd and ridiculous. I feel like I need one.

I got that same feeling when I saw it. :lol:

Those pistol bayonets are marketed by LaserLyte and supposedly made by K-Bar.

I'm thinking about buying another rail handgun so that I can get the third Rambo Knife-looking bayonet.

I'm a little behind! Looks nice Trace! One question though, did you go with the 1/7 twist on purpose? Just wondering if you wanted it to shoot the heavier bullets.

Damn, those are some sexy handguards.

Nice rifle. There are many like it, but that one is yours.

Q: Why the 1:7 twist? Going to be competitive shooting with it?

Thanks fellas!

I went with the 1:7 twist because I want to try my hand at some long distance shooting with the AR, in the 500 yard range. I've read it *can* be done and that the 1:7 twist is more conducive for longer shots, so that's my reasoning.

Of course, now I'm thinking about how to build my next AR. :dribble:

I was hoping that was your plan Trace ;) That 1/7 twist is definitely better for the heavy bullets for long range shooting. The light bullets won't be as accurate with that much twist but will be fine for plinking.

Of course, the problem you run into with the heavier bullets is that they're also longer, which can lead to feeding issues in automatic rifles.
As I understand it, anything over 75gr is best left to bolt action rifles.

That's my understanding as well... and ARs (at least the military kind) do tend to misfeed/misfire anytime anything that isn't just "so" is introduced. So best to test out any new ammo in small portions first before buying any large quantities.

I have zero idea why people try to make the .223 round out to be something it's not. What's the point of shooting heavy bullets out of it? Velocity is so low, it's ridiculous. Want to launch a heavier bullet? Get a larger caliber.

New score; now I have to wait 4-5 months for my permission slip to come in...

Nice. Permission slip? SBR?

It's an SBS. It started life as a standard Saiga 12 and was converted by Tromix. With the eight inch barrel, the magazine looks like its bigger than the gun when the stock is folded.

Screw the ATF... I approve. :dthumb:

I have seen Mr. Rumores work he does a great job. He is light years ahead of some of a lot of the Hack and Slash artists that are out there. Congrats on a great Score hopr the form 4 clears quickly.
On a quick aside any trouble getting you CLEO to sign off?

I wish that Tromix would still convert 5.56mm AK mags to use in Valmets. There's a Valmet M76 in a local gun shop that I'd love to buy but not if I can't find mags for it.

You might try Krebs Customs I have a had a couple of his pieces throughout he year and including a 308 VEPR that her converted to accept M14 mags,, I don't know the Valmet but as I recall there was a Galil adapter ( a sleeve as recall) that accepted m16 mags and allowed them to run reliably in Galil

Kregs never did any mag conversion, but Tromix did some years back. Don't know why they stopped doing that.

The Galil mag conversion was crappy. Besides, I see no point in buying a Valmet or a Galil then use the crappy ass Mattel Toy mags.

Not to be augmentative but it was Krebs that converted the VEPR 308 I had to take M14 mags. It was a great set up and it was about 2002 or 2003. (it was done a a way of stepping around the HI Cap Magazine ban that was inplace at the time. I don't know what they have done since.
I will probably be snagging one of the VEPRs that are being imported now, with an eye adding a Ace Folder HK rear sight and a Kobra.

Sorry, I should have been more clear. Krebs never did any AK-to-valmet 5.56mm mag conversion.

I'm still waiting for his signature, but the guys at the gun store say he'll sign off on sbr, sbs, supressors, and machine guns. On a side note, it's kind of ironic that the sheriff of the most liberal county in Texas will sign off on NFA items.

Which county?
I've wondered about getting a suppressor here (Austin area).
I was in Travis, but now I'm in Williamson...not sure if my chances went up or down. :lol:

I'm in Travis county (Austin). From what I've been told, the Williamson County sheriff won't sign off on NFA items. If that's true, you'd have to have a lawyer draw up a trust to bypass the CLEO signoff.

The Gun Store off of Buttercup Creek RD in Cedar Park Is a class iii dealership and the guys are really helpful and cool to deal with.

Figures... stupid Wilco. :rolleyes:
Ah well, I'm in no hurry. Who knows, I might move back to Travis Co. when I buy a house. I'm just renting in Round Rock right now.

New holster for the Glock came in the mail:

https://lh3.googleusercontent.com/-h...-13-04_456.jpg

It's a Remora Clipless Holster. It has a very grippy texture to it, allowing you to slip it in the waistband without the need for clips. I have a similar one for my S&W 637 (Sticky Hoslter) that I love. This one seems to be a little better in quality than the Sticky Holster and a little more grippy. There's a bit of kydex around the opening to make it easy to reholster. Price was quite nice as well. I've been using the Glock in a Kholster for the past few months, and while I like it quite a bit, it's a slight pain in the dick to get set up. Because of the hassle, I've been carrying the S&W more than the Glock. The clipless holsters are the way to go.

I'm not sure I'd be down with a clipless holster. What happens when you gotta piss or shiz or whatever?

I use a Kholster as well.

I wouldn't mind trying a clipless. If I have my shirt tucked in, then a clip over the outside of my pants is a bit of a giveaway and defeats the purpose of carrying concealed (unless I want to clip to my underwear).

I wear my holsters at roughly 4 o'clock. I haven't had it fall out when pissing at a urinal. When shitting, I have to hold the gun. A mild inconvenience, sure, but it's a breeze to put back in place, and I rarely shit in public. :lol:

How could you not want one after this chick models it in a bikini?

http://www.youtube.com/watch?v=4izM0fiz6kk

Chick needs to get on with it....I can't watch no 20 minute video.

LOL. I'm not sure she's concealing well in that bikini...but certainly a STRONG effort on her part!

CEII and a saiga 12



if you goto his race camp, you also get to shoot alot of guns, got a barrett 50 there too

http://www.youtube.com/watch?v=Cal-k...layer_embedded

I'm in love. How can you not love a girl that carries in her bikini and dries her holsters in the dish drainer!! :lol:

He won't be shooting that again anytime soon. :lol:

Anyone else roll there own?
http://i261.photobucket.com/albums/i...o/P1030128.jpg
the one on the right is one of mine built using a Romy G Kit and chrome lined Barrel on a NDS receiver
The one on the left is a Arsenal SGL21

Which right is that again? :scratch:

Nice toys though :D

I've thought about it before, but compared to the AR's simple, nearly toolless modular design, Kalashnikovs require a bit more of a workshop than I have access to.
Nice rifles there. :dthumb:

Yeah the initial tooling (Press and rivet jigs) was an investment of about 300. Once I had it it seemed a shame not to use it.

Ok, I have a question that I haven't quited figured out an answer to. Do you all carry while on your bike, and if so, how do you do it?

Same way I carry when I'm not on my bike. Same holster, same spot. No issues.

I did when I lived in FL but haven't really felt the need up here. I would carry it in the internal pocket in my jacket.

the problem with carrying in florida is that if you are speeding and carrying, it is automatically upgraded to a felony, and you will lose your permit. I am forgetting, but It might be that you have to be doing 30mph over, but that is pretty easy to do on a bike.

A.) That's a stupid law. B.) Don't speed. C.) If you do speed maybe try to keep it less than 30mph over.


A public service announcement brought to you by the good folks at mark138 Inc.

I've looked at the concealed carry statutes and the speed law statutes and see no mention of that. Not saying something like that doesn't exist, but I don't see it stated in the statutes I've looked at. Not that it would be a problem. I rarely speed, and I don't exactly have a bike that's going to get me in any speed related trouble. I've been pulled over once for speeding while carrying and the officer made no mention of any kind of upgrade to felony. Hell, I didn't even get a ticket, just got told to slow down.

Bought a new broomstick

Daniel defense dd200009, no pics yet, but I've added a MIAD grip and AFG

Pics or it didn't happen.

Yeah. Ed breached the rule of pics.

still no pics

but here are the specs

"Daniel Defense is proud to announce the unveiling of their long anticipated M4 Carbine. This Rifle was engineered with the tactical professional and shooting enthusiast in mind. Built to redefine the benchmark in small arms performance, this precision-crafted firearm will perform faithfully in any Military, Law Enforcement, Homeland Security, and or Home/Personal Security environment.

" Mil. Spec. Lower Receiver with Enhanced Magazine Well
" Mil. Spec Upper Receiver with Index Marks and A4 Feed Ramps
" "16 4150 MP Tested, Chrome Lined, 1:7, M4 Profile Barrel
" A2 Birdcage Flash Hider
" Mil-Spec MP Tested Bolt and Properly Staked Gas Key
" Daniel Defense A1.5 BUIS and Pinned "F" Marked Front Sight Base
" Daniel Defense Omega X Rail
" Magpul MOE Buttstock & Mil. Spec. 5 Position Receiver Extension
" Daniel Defense Vertical Foregrip
" Custom Daniel Defense Full-Latch 30ft Impact Plastic Case "

file pic
http://www.defensereview.com/wp-cont...-1024x6821.jpg

now envision this on the ft

https://www.aimsurplus.com/eos/image...xmag411blk.jpg

and this in the middle

http://tgscom.com/images/sharedimage...ul/MIAD_01.jpg

and there you have my rifle........lol

more of that crazy ruskie

http://www.wimp.com/glockammo/

So this morn, the oldest boy and I are at at local gun range

They had just declared the range 'live'

In plinking along on my AR

Within 10 after starting a cease fire comes over the mic

First we thought somebody had injured their hand w the slide coming back and catching their hand

Turns out somebody put a round thru their hand

UGH, fire & ambulance came

dude was shooting handguns, yes there was blood down there, no I didn't go look, some dude left, commenting he lost his stomach for shooting that day, I kept on plinking after the range was opened up again

ok, here are some pics

daniel defense AR
mossberg 930 SPX
Kimber CDP PRO II

http://i54.tinypic.com/miip1.jpg

http://i51.tinypic.com/33pfsqr.jpg

http://i55.tinypic.com/11hgy2p.jpg

http://i54.tinypic.com/4hcl05.jpg

Damn... killer collection... How much did that DD set you back?

next pres of the US, Rick Perry, lol

http://i265.photobucket.com/albums/i...t/IMG_6862.jpg
http://img.photobucket.com/albums/v1...0820111113.jpg

http://www.leenetworx.com/seven01.jpg









http://www.leenetworx.com/IMG_2889.JPG








http://www.leenetworx.com/box.jpg
What's in the boooooxxxxx?!?!??!???


http://www.leenetworx.com/IMG_2890.JPG







http://www.leenetworx.com/701EEBF8C3...7F252CF1F0.jpg
What's inside the box!?!?!?




http://www.leenetworx.com/IMG_2891.JPG








http://www.leenetworx.com/brad-pitt-...e1-525x288.jpg
Oh, well that's cool. Thanks.

I have to agree with Brad Pitt, that thing looks cool. What is it? I checked out the Legacy/Puma website and didn't see anything like that.

Nice gun. Puma 50? It almost has a ppsh-41 vibe to it. I like it quite a bit.

Went shooting at work today to qualify for the german armed forced proficiency badge, had to shoot 5/5 from 25 yards. Then after we qualified we used the extra ammo and some zombie targets


http://a2.sphotos.ak.fbcdn.net/hphot..._5267831_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphot...2_436059_n.jpg

Corey is right on, it's inspired by the PPSh-41. It's the Puma PPS 50 Wildcat. 22LR so I'll laugh every time I spend $2 to fill up the 50 round drum. Been wanting an inexpensive plinker for some time and this looked fun.

They also make 30 round magazines, traditional wooden stock models and a full synth stock model that loses the tactical buttstock and vertical fore grip.

Cool targets.

you do know my wife is on this site, and stalks me????

:lol


COOL weapon lee, thinking about picking up a 10/22 or crickett in pink for April.....

That's what PM's are for ninja!

http://www.youtube.com/watch?v=-A7dF...eature=related


This is just too cool not to see.

http://www.youtube.com/watch?v=WwhCy...1&feature=fvwp

OK, two things.

First off, I HAVE to get some of those.

Secondly, I love that the Google Ad that came up under the Dragon Breath vid, is for advice on dating Chinese Ladies. :lol:

JC

Bought me a shotty. Pics eventually.

Hatsun Escort MP pump. It's 18 inches schlong.


http://i284.photobucket.com/albums/l...MP-21Large.jpg

http://i284.photobucket.com/albums/l...MP-25Large.jpg

http://i284.photobucket.com/albums/l...MP-23Large.jpg

http://i284.photobucket.com/albums/l...MP-28Large.jpg

http://i284.photobucket.com/albums/l...MP-27Large.jpg

http://i284.photobucket.com/albums/l...P-210Large.jpg

Nice mixture of ghost ring and fire sights there.

Very nice - love the pistol grip handle with the stock. I've been playing with the idea of picking up another shotgun just for skeet shooting and joining a local club. I'd modify my Winchester 1300 strictly for home defense.

I almost pissed myself. LOL. Also I have a sigma and its a damn good pistol. Screw you if you dont think so.

The ending phrase will make a little tinkle come out.

http://www.youtube.com/watch?v=iQYep...layer_embedded

Absolutely brilliant. :lol:

Damn, that looks badass...

Those are always great.

That was great, but i have a sigma too and think it sucks ass.