Painting questions.

DLIT · 03-27-2008, 09:56 AM

I have to save my money in case we move here soon. So I've decided my only option is to rattle can it. I want to take my time, put multiple coats on it and then wet-sand it. Here's some questions.

1. Do I start to wet-sand once the coat is completely dry?
2. What grit of paper should I use?
3. What's the best paint I should use (because the plastics have to flex, I don't want the paint to crack)?

That's all the questions I have for now. I'm sure I'll have more.

JoJoYZF · 03-27-2008, 03:01 PM

Id probably use a couple different sand papers on it. Start with something like a 220 or finer and then get finer as you go in order to get the smoothest finish. As far as paint goes, the one that flexs the most is latex, but most spray paints are oil based. I know that Rustoleum has a paint made specific for plastic that would probably work well or they have one line that is called Painters Touch that is a latex spray paint.

OneSickPsycho · 03-30-2008, 02:27 AM

1. Yes
2. 600 grit or similar is what I would use
3. Krylon Fusion or something like it... No primer needed on plastics with that shit...

Mr Lefty · 03-30-2008, 02:35 AM

here... I bookmarked this a while back..
http://www.cbrforum.com/m_484838/tm.htm

should help a bit

jalaan1 · 03-30-2008, 03:40 AM

good info to know, gonna do one of my lowers in about a week or so.

rattle can also.

Dnyce · 03-31-2008, 04:47 AM

are you talkin bout your track plastics/fiberglass, or your street stuff?

DLIT · 03-31-2008, 04:53 AM

My track 'glass. I actually dropped it off to a guy from a local forum to paint it. Little ghost flame action in a couple spots.

03-27-2008, 09:56 AM	#1
DLIT Clit Commander Join Date: Feb 2008 Location: Las Vegas Moto: 2012 Ducati 1199 Panigale S Posts: 4,189	Painting questions. I have to save my money in case we move here soon. So I've decided my only option is to rattle can it. I want to take my time, put multiple coats on it and then wet-sand it. Here's some questions. 1. Do I start to wet-sand once the coat is completely dry? 2. What grit of paper should I use? 3. What's the best paint I should use (because the plastics have to flex, I don't want the paint to crack)? That's all the questions I have for now. I'm sure I'll have more. __________________ Dress for the crash. Not the ride.

03-30-2008, 03:40 AM	#5
jalaan1 orangina Zed Join Date: Feb 2008 Location: LI, NY Moto: '12 Z1000 Posts: 700	good info to know, gonna do one of my lowers in about a week or so. rattle can also. __________________

03-31-2008, 04:53 AM	#7
DLIT Clit Commander Join Date: Feb 2008 Location: Las Vegas Moto: 2012 Ducati 1199 Panigale S Posts: 4,189	My track 'glass. I actually dropped it off to a guy from a local forum to paint it. Little ghost flame action in a couple spots. __________________ Dress for the crash. Not the ride.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

03-27-2008, 03:01 PM	#2
JoJoYZF Bring on the Zombies! Join Date: Feb 2008 Location: Cleveland Moto: 2000 Yamaha YZF600R Posts: 2,691	Id probably use a couple different sand papers on it. Start with something like a 220 or finer and then get finer as you go in order to get the smoothest finish. As far as paint goes, the one that flexs the most is latex, but most spray paints are oil based. I know that Rustoleum has a paint made specific for plastic that would probably work well or they have one line that is called Painters Touch that is a latex spray paint.

03-30-2008, 02:27 AM	#3
OneSickPsycho Ride Like an Asshole Join Date: Feb 2008 Moto: nothing... Posts: 11,254	1. Yes 2. 600 grit or similar is what I would use 3. Krylon Fusion or something like it... No primer needed on plastics with that shit...

03-30-2008, 02:35 AM	#4
Mr Lefty TWFix Legend Join Date: Feb 2008 Location: Denver CO Moto: 01 BMW F650GS Dakar Posts: 15,677	here... I bookmarked this a while back.. http://www.cbrforum.com/m_484838/tm.htm should help a bit

03-31-2008, 04:47 AM	#6
Dnyce flyin high Join Date: Mar 2008 Location: cali Moto: 10speed huffy w/cards in the spokes Posts: 2,318	are you talkin bout your track plastics/fiberglass, or your street stuff?