AutoCAD/Beer bottling help

CasterTroy · 09-15-2010, 01:57 PM

Anyone have a plan view of a bottling line in a dwg format?

Or hell a gif, tiff, pdf?

Upfitting a warehouse to be a local brewery and need to lay out 2 bottling lines....owners sketches aren't cutting it

Krabill · 09-15-2010, 02:35 PM

You can't draw a beer bottle?

CasterTroy · 09-15-2010, 02:49 PM

Quote:

Originally Posted by Krabill

You can't draw a beer bottle?

THAT I can manage

Krabill · 09-15-2010, 03:16 PM

Hydrant · 09-15-2010, 09:43 PM

CT let me do some checking. I might have some drawings of everything laid out of a open warehouse turned tea factory, including production, bottling, and packaging. That job was a while ago, but the drawings might still be around.

tommymac · 09-15-2010, 10:09 PM

If you need help drinking the beer I am available

askmrjesus · 09-15-2010, 11:40 PM

I can you give tons of drawings of bottling layouts, but without knowing what equipment is spec'd, and how much room you have to put it in, I'm not sure how it helps.

JC

CasterTroy · 09-16-2010, 07:28 AM

Quote:

Originally Posted by Hydrant

CT let me do some checking. I might have some drawings of everything laid out of a open warehouse turned tea factory, including production, bottling, and packaging. That job was a while ago, but the drawings might still be around.

That'd be awesome

Quote:

Originally Posted by askmrjesus

I can you give tons of drawings of bottling layouts, but without knowing what equipment is spec'd, and how much room you have to put it in, I'm not sure how it helps.

JC

I'm kinda right there with you. This is a small local brewery that is looking to go nationwide. They're buying all used equipment from some big outfit in Charlotte that is about to fold

The bottling line they sketched and will be adding is approx 25' wide x 43' long

See they need a LOAN to get the building, and equipment....but they can't get a loan without drawings. And I can't get specs or information because they are buying USED equipment and the rep for the equipment isn't helping out because he's not GETTING anything for his services (used equip).

It's a real circle jerk.....I just need a pivot man to complete this wonderful loop

All I need is the approx location of where they'll need drains, water, and disconnects.

Below is a hand sketch they gave me...shows as a red "X" but if you click it the pic shows up

G-Rex · 09-16-2010, 07:30 AM

You're complaining about getting "that"?!

I should scan some of the sketches I've received from clients. Hell, you got..gasp..dimensions!!

CasterTroy · 09-16-2010, 07:34 AM

Oh not complaining......just need something a little more clear to start from.

Right now I've cleaned it up a bit and converted the tiff into a DWX and inserted it into the drawing just to have something on the paper.

I'd LOVE to have soemthing that looks a bit more like what's planned.

These guys are GREAT to work with, and know their shit...but taking that knowledge and converting it to engineer-speak is not their best strong-suit

You know nothing of that

09-15-2010, 01:57 PM	#1
CasterTroy ................ Join Date: Nov 2008 Location: NC Posts: 3,028	AutoCAD/Beer bottling help Anyone have a plan view of a bottling line in a dwg format? Or hell a gif, tiff, pdf? Upfitting a warehouse to be a local brewery and need to lay out 2 bottling lines....owners sketches aren't cutting it __________________ “Being tolerant does not mean that I share another one’s belief. But it does mean that I acknowledge another one’s right to believe, and obey, his own conscience.” Viktor Frankl

09-15-2010, 02:35 PM	#2
Krabill WERA Yellow Plate Join Date: Nov 2008 Location: Tulsa, OK Moto: 08 WR250R, 12 XTZ1200 Posts: 558	You can't draw a beer bottle? __________________ www.wrrdualsport.com www.designatedvaping.com

09-15-2010, 03:16 PM	#4
Krabill WERA Yellow Plate Join Date: Nov 2008 Location: Tulsa, OK Moto: 08 WR250R, 12 XTZ1200 Posts: 558	__________________ www.wrrdualsport.com www.designatedvaping.com

09-15-2010, 11:40 PM	#7
askmrjesus Soul Man Join Date: Nov 2008 Location: Everywhere, all the time. Moto: '0000 Custom Turbo Cross (with jet kit). Posts: 6,481	I can you give tons of drawings of bottling layouts, but without knowing what equipment is spec'd, and how much room you have to put it in, I'm not sure how it helps. JC __________________ The way things are going, they're gonna crucify me.

09-16-2010, 07:30 AM	#9
G-Rex Where to next? Join Date: Nov 2008 Location: OK to the C Moto: TL1000R, Hayabusa, R1150RT Posts: 1,333	You're complaining about getting "that"?! I should scan some of the sketches I've received from clients. Hell, you got..gasp..dimensions!! __________________

09-15-2010, 09:43 PM	#5
Hydrant WERA Yellow Plate Join Date: Dec 2008 Location: Cincinnati, Ohio Moto: 2003 Suzuki TL1000R, 2002 Honda CBR 600 F4i Posts: 660	CT let me do some checking. I might have some drawings of everything laid out of a open warehouse turned tea factory, including production, bottling, and packaging. That job was a while ago, but the drawings might still be around.

09-15-2010, 10:09 PM	#6
tommymac Moto GP Star Join Date: Nov 2008 Posts: 11,022	If you need help drinking the beer I am available

09-16-2010, 07:34 AM	#10
CasterTroy ................ Join Date: Nov 2008 Location: NC Posts: 3,028	Oh not complaining......just need something a little more clear to start from. Right now I've cleaned it up a bit and converted the tiff into a DWX and inserted it into the drawing just to have something on the paper. I'd LOVE to have soemthing that looks a bit more like what's planned. These guys are GREAT to work with, and know their shit...but taking that knowledge and converting it to engineer-speak is not their best strong-suit You know nothing of that __________________ “Being tolerant does not mean that I share another one’s belief. But it does mean that I acknowledge another one’s right to believe, and obey, his own conscience.” Viktor Frankl