Need Help Please.

m0n1 · 11-07-2008, 05:20 PM

Yesterday, i let the clutch out and stalled the bike. my fault. put it in neutral, flipped the cutoff switch off then back on, start, nothing. take key out, and start from begining. key to on, (i dont hear the sounds i usually do) lights/indicators come on, but still nothing. 1/2 mile from work, so coworker shows up and helps move me to a gastation parking lot where whe connect the jumper cables to the battery and let it sit. (i have never jump started a bike, but i knew not to have the cars engine on.) still nothing. finally we decide to push start it and it starts right up. get it to work, finish my day, try to start the bike and it starts right up.

07 r1- flush mount and CA taillight are the only electrical mods done to the bike a long while back. factory battery, and i use a bat. tender when i know i wont be riding for a couple of days.

first thing to do this weekend is to get a volt meter (Thanks GM, we do listen)but can anyone tell me what i should be looking for? checking?

Thanks in advance for any advice.

the chi · 11-07-2008, 05:28 PM

Quote:

Originally Posted by m0n1

Yesterday, i let the clutch out and stalled the bike. my fault. put it in neutral, flipped the cutoff switch off then back on, start, nothing. take key out, and start from begining. key to on, (i dont hear the sounds i usually do) lights/indicators come on, but still nothing. 1/2 mile from work, so coworker shows up and helps move me to a gastation parking lot where whe connect the jumper cables to the battery and let it sit. (i have never jump started a bike, but i knew not to have the cars engine on.) still nothing. finally we decide to push start it and it starts right up. get it to work, finish my day, try to start the bike and it starts right up.

07 r1- flush mount and CA taillight are the only electrical mods done to the bike a long while back. factory battery, and i use a bat. tender when i know i wont be riding for a couple of days.

first thing to do this weekend is to get a volt meter (Thanks GM, we do listen)but can anyone tell me what i should be looking for? checking?

Thanks in advance for any advice.

Not trying to postwhore I swear, but if your lights and indicators came on fine, I dont think it would be an issue with the battery being bad.

I killed mine a few weeks ago and got nothing, no response at all...had to let her sit on the tender a long time but managed to get the battery charged...she works and I got a spare in case...

have you had any issues with her starting back up since then?

I know ive stalled before and it took a minute to restart but its not a constant thing...

smileyman · 11-07-2008, 05:29 PM

Kickstand switch? Clutch in switch? Some have the switch that won't let it start won't start without the clutch in...Test light and maybe you can google up the wiring schematics...Could check for in line blow fuses in the wiring harness...Good luck!

t-homo · 11-07-2008, 05:37 PM

Another thing is to never jump start a bike from a car.

Sixxxxer · 11-07-2008, 05:57 PM

Quote:

Originally Posted by t-rock

Another thing is to never jump start a bike from a car.

They Say that...But if I had no choice I'd Do it...Just make sure it was as quickly done as possible.

BobTheBiker · 11-07-2008, 07:41 PM

I wont jumpstart my CBR unless the battery is COMPLETELY dead. then I'll try to find somewhere with a trickle charger instead. otherwise, BUMP START.

m0n1 · 11-07-2008, 10:07 PM

Quote:

Originally Posted by The Chi

have you had any issues with her starting back up since then?

I know ive stalled before and it took a minute to restart but its not a constant thing...

Tried about an hour and a half after I got home, it started.
Just tried it again and it didn’t start. It cranked twice and then all I heard was fast tick sound coming from under the seat and all the indicator lights dimming.

Quote:

Originally Posted by smileyman

Kickstand switch? Clutch in switch? Some have the switch that won't let it start won't start without the clutch in...Test light and maybe you can google up the wiring schematics...Could check for in line blow fuses in the wiring harness...Good luck!

in the parking lot, I was in neutral, clutch in and kickstand up. This was after about 30 mins of waiting on the side of the road.

Normally the bike would start in neutral with stand down and clutch out.

Quote:

Originally Posted by t-rock

Another thing is to never jump start a bike from a car.

I hear ya. I have the deltran jr. and it came with the alligator clips. Plugged one end to the connector and used the clips on the car battery. Made sure the car was off.

Thanks everyone, running the charger to it now. Tomorrow I’m taking the battery to get tested.

jeeps84 · 11-08-2008, 01:42 PM

Quote:

Originally Posted by m0n1

Tried about an hour and a half after I got home, it started.
Just tried it again and it didn’t start. It cranked twice and then all I heard was fast tick sound coming from under the seat and all the indicator lights dimming.

That sounds like loss connections. Check, clean. Other wise the battery may be done. Issues like this are most always either operator error by missing a safety feature. In other cases it is one of those components that is malfunction.

Particle Man · 11-10-2008, 06:35 PM

Quote:

Originally Posted by m0n1

Tried about an hour and a half after I got home, it started.
Just tried it again and it didn’t start. It cranked twice and then all I heard was fast tick sound coming from under the seat and all the indicator lights dimming.

Thanks everyone, running the charger to it now. Tomorrow I’m taking the battery to get tested.

the fast click tells me either battery, relay, or something crazy with the starter...

r!der · 11-07-2008, 07:50 PM

I've jump started my bike with a car a bunch of times.

11-07-2008, 05:20 PM	#1
m0n1 Street Stunter Join Date: Feb 2008 Location: Long Beach CA Moto: 07 R1 Posts: 89	Need Help Please. Yesterday, i let the clutch out and stalled the bike. my fault. put it in neutral, flipped the cutoff switch off then back on, start, nothing. take key out, and start from begining. key to on, (i dont hear the sounds i usually do) lights/indicators come on, but still nothing. 1/2 mile from work, so coworker shows up and helps move me to a gastation parking lot where whe connect the jumper cables to the battery and let it sit. (i have never jump started a bike, but i knew not to have the cars engine on.) still nothing. finally we decide to push start it and it starts right up. get it to work, finish my day, try to start the bike and it starts right up. 07 r1- flush mount and CA taillight are the only electrical mods done to the bike a long while back. factory battery, and i use a bat. tender when i know i wont be riding for a couple of days. first thing to do this weekend is to get a volt meter (Thanks GM, we do listen)but can anyone tell me what i should be looking for? checking? Thanks in advance for any advice. __________________ "The soldier above all others prays for peace, for it is the soldier who must suffer and bear the deepest wounds and scars of war." –Douglas MacArthur “Our job as citizens also includes backing our president when he makes a decision, whether we like that decision or not,"- Damion Maynard

11-07-2008, 05:29 PM	#3
smileyman White Trash Hero Join Date: Mar 2008 Location: NW Arkansas Moto: Buell 1125R Porco Rosso Edition Posts: 4,895	Kickstand switch? Clutch in switch? Some have the switch that won't let it start won't start without the clutch in...Test light and maybe you can google up the wiring schematics...Could check for in line blow fuses in the wiring harness...Good luck! __________________ Arkriders.com To be the best you must first be willing to risk the worst!

11-07-2008, 07:50 PM	#10
r!der snowboarder Join Date: Feb 2008 Location: CAL-E-PHONE-YA Moto: 05 GSXR 600 Posts: 259	I've jump started my bike with a car a bunch of times. __________________

11-07-2008, 05:37 PM	#4
t-homo WSB Champion Join Date: Feb 2008 Location: Springfield, MO Posts: 7,146	Another thing is to never jump start a bike from a car.

11-07-2008, 07:41 PM	#6
BobTheBiker too much time on my hands Join Date: Jul 2008 Location: the northern district of god damn Moto: 01 ZX6R, looking for more now. Posts: 1,802	I wont jumpstart my CBR unless the battery is COMPLETELY dead. then I'll try to find somewhere with a trickle charger instead. otherwise, BUMP START.