Aftermarket Levers...Which are the best?

zippychickie636 · 04-26-2009, 09:45 AM

So I have a 2005 zx6r, and my little girl hands can barely pull the clutch in, it's too tight, and even after I adjusted it to as close to the handle bars as possible it's not really working for me. I'm wondering what you guys think the best adjustable levers are out there, or what would work for me.

also I need a new chain and sprockets which is probably the explanation for what I'm about to say, but I thought I'd mention it anyway and see if anyone else has this problem. When I first take off theres a quick clanking noise that gets progressivly faster in rythm until like 5-6 rpms and it stops. It only happens in first and second gear and everytime I tighten my chain it seems to go away. BUT what I think is weird is that it comes back within a few days. If it were just the chain I don't think it would loosen up the point of clanking that quickly? but then again I don't really know. Any thoughts guys? (or ladies)

was92v · 04-26-2009, 10:07 AM

The noise is the chain/sprockets. The quicker it comes back, the worse they are. The noise will go away when the worn stuff goes away.

Mr Lefty · 04-26-2009, 10:16 AM

as far as levers... there are a few good brands out their... but I've only had Pazzo's... I liked them on my ZZR... so I ordered another set for my 600RR... though this time I went with the shorty version.

the adjustable is not gonna do much about how hard it is to pull... it'll just position the lever in it's static position (ie where the lever starts) closer to or further from the grips.

that's why I got them... so I could pull the lever in all the way and not crush my little fingers... and also I only use 2 fingers anyhow...

have you lubed the clutch cable? that may make it a little easier to pull... other than that I'm at a loss for how to ease that up for you

tached1000rr · 04-26-2009, 11:11 AM

I would agree about trying to lube your clutch cable. How many miles on your chain and sprocket?

zippychickie636 · 04-26-2009, 12:31 PM

thanks for the advice guys. There's deffinatly alot of miles on the chain and sprockets I mean I got the bike at 13,000 miles in oct. and I don't know if/when the previous owner chained them last, and now the bikes at 16700...so I know I'm pushin it. I'm very cautious though with the whole thing so it's not like I'm not gonna replace it. I was just curious about whether the noise was related or not but from the looks of things it sure is. thanks again

tached1000rr · 04-26-2009, 12:33 PM

Yep I'd go ahead and do the chain and sprockets it will provide piece of mind and like you said you don't know what type of maintenance (if any) the previous owner provided.

Mr Lefty · 04-27-2009, 10:12 AM

Lol.. That harley guy needs a bit of an education on sprockets I think. The year of the bike has little to do with Anything. Shit I think warputer has something like 45000 on his busa and I think its an 06. Not sure how long the Average chain and sprocket last though. I'd guess 15k

Dave · 04-27-2009, 10:57 AM

Quote:

Originally Posted by eBBs15

Lol.. That harley guy needs a bit of an education on sprockets I think. The year of the bike has little to do with Anything. Shit I think warputer has something like 45000 on his busa and I think its an 06. Not sure how long the Average chain and sprocket last though. I'd guess 15k

15k for steel. About half that for most aluminum

Antwanny · 04-27-2009, 11:58 AM

pazzo or crg id go pazzo cheaper and good quality.
Steel sprockets ftw

Dave · 04-27-2009, 12:07 PM

Quote:

Originally Posted by Dave

15k for steel. About half that for most aluminum

oh yeah and half that again for vortex

04-26-2009, 09:45 AM	#1
zippychickie636 Street Stunter Join Date: Dec 2008 Location: NJ Moto: 2005 zx6r (636) Posts: 80	Aftermarket Levers...Which are the best? So I have a 2005 zx6r, and my little girl hands can barely pull the clutch in, it's too tight, and even after I adjusted it to as close to the handle bars as possible it's not really working for me. I'm wondering what you guys think the best adjustable levers are out there, or what would work for me. also I need a new chain and sprockets which is probably the explanation for what I'm about to say, but I thought I'd mention it anyway and see if anyone else has this problem. When I first take off theres a quick clanking noise that gets progressivly faster in rythm until like 5-6 rpms and it stops. It only happens in first and second gear and everytime I tighten my chain it seems to go away. BUT what I think is weird is that it comes back within a few days. If it were just the chain I don't think it would loosen up the point of clanking that quickly? but then again I don't really know. Any thoughts guys? (or ladies)

04-26-2009, 10:07 AM	#2
was92v Nowhere Man Join Date: Nov 2008 Posts: 558	The noise is the chain/sprockets. The quicker it comes back, the worse they are. The noise will go away when the worn stuff goes away.

04-26-2009, 10:16 AM	#3
Mr Lefty TWFix Legend Join Date: Feb 2008 Location: Denver CO Moto: 01 BMW F650GS Dakar Posts: 15,677	as far as levers... there are a few good brands out their... but I've only had Pazzo's... I liked them on my ZZR... so I ordered another set for my 600RR... though this time I went with the shorty version. the adjustable is not gonna do much about how hard it is to pull... it'll just position the lever in it's static position (ie where the lever starts) closer to or further from the grips. that's why I got them... so I could pull the lever in all the way and not crush my little fingers... and also I only use 2 fingers anyhow... have you lubed the clutch cable? that may make it a little easier to pull... other than that I'm at a loss for how to ease that up for you

04-26-2009, 11:11 AM	#4
tached1000rr WERA White Plate Join Date: Dec 2008 Location: NC Moto: 2009 GSXR 1300 Posts: 2,448	I would agree about trying to lube your clutch cable. How many miles on your chain and sprocket?

04-26-2009, 12:31 PM	#5
zippychickie636 Street Stunter Join Date: Dec 2008 Location: NJ Moto: 2005 zx6r (636) Posts: 80	thanks for the advice guys. There's deffinatly alot of miles on the chain and sprockets I mean I got the bike at 13,000 miles in oct. and I don't know if/when the previous owner chained them last, and now the bikes at 16700...so I know I'm pushin it. I'm very cautious though with the whole thing so it's not like I'm not gonna replace it. I was just curious about whether the noise was related or not but from the looks of things it sure is. thanks again

04-26-2009, 12:33 PM	#6
tached1000rr WERA White Plate Join Date: Dec 2008 Location: NC Moto: 2009 GSXR 1300 Posts: 2,448	Yep I'd go ahead and do the chain and sprockets it will provide piece of mind and like you said you don't know what type of maintenance (if any) the previous owner provided.

04-27-2009, 10:12 AM	#7
Mr Lefty TWFix Legend Join Date: Feb 2008 Location: Denver CO Moto: 01 BMW F650GS Dakar Posts: 15,677	Lol.. That harley guy needs a bit of an education on sprockets I think. The year of the bike has little to do with Anything. Shit I think warputer has something like 45000 on his busa and I think its an 06. Not sure how long the Average chain and sprocket last though. I'd guess 15k

04-27-2009, 11:58 AM	#9
Antwanny WERA White Plate Join Date: Apr 2008 Location: Maryland Posts: 1,047	pazzo or crg id go pazzo cheaper and good quality. Steel sprockets ftw