FZ1 problems

Cutty72 · 04-16-2008, 02:25 PM

OK a co worker of mine has a 2002 FZ1. He put a hole in his oil cooler assembly (not the radiator looking thing) when he was changing the oil (oops).
After getting that welded, and putting everything back together when he started it, it ran for a little bit when suddenly oil came out of the coolant overflow tank, and coolant out near the carbs.

Any ideas? It was the first time it has been run this season after being winterized.

TIA for the help.

LaFemmes · 04-16-2008, 02:29 PM

http://www.yamahafz1oa.com/forum/

Gas Man · 04-17-2008, 02:15 AM

That's not nearly enough info...

What was the running temp when this happened?

What did he do to winterize it?

Who did the oil cooler repair? Was it repaired on the bike or off?

Was there any damage to the coolant rad?

Are all the hoses properly attached?

Did he criss cross the tubes during this?

Cutty72 · 04-17-2008, 01:55 PM

Quote:

Originally Posted by Gas Man

That's not nearly enough info...

What was the running temp when this happened?
Uh, air temp about 45, so maybe 80 or so. Had only run for less than a minute

What did he do to winterize it? Stabil in the gas.

Who did the oil cooler repair? Was it repaired on the bike or off?
Local welding shop, took it off to weld

Was there any damage to the coolant rad? no

Are all the hoses properly attached? yes, as per pics taken before disassembly

Did he criss cross the tubes during this? no, as per said pics.

Hope that helps

Gas Man · 04-18-2008, 02:12 AM

Do you have a service manual?

Cutty72 · 04-19-2008, 08:33 PM

Quote:

Originally Posted by Gas Man

Do you have a service manual?

Another friend that happens to be a Yami freak has a Clymers.
We are thinking that the oil cooler has coolant flowing through it, and he did more than surface damage to it.

I'm gone, so hopefully they can get it up and running before I get back!

Gas Man · 04-19-2008, 10:08 PM

Yeah but those 2 coolers should be seperate correct?!

NONE_too_SOFT · 04-19-2008, 10:16 PM

people do some weird shit.

OTB · 04-20-2008, 10:15 AM

oil in coolent tank means only come from a couple of sources, none of them good.

Oil is getting onto coolent passages..either through a blown head or cylinder gasget, a blown shaft seal somewhere, or he did not have enough antifreeze over winter and there is a crack somewhere in the block, cylinder or head. The presence of coolent leaks near the intakes would lead me to opine that a cylinderhead gasket leak, crack, or warpage has occured.

But then, diagnosing stuff over the internet is fraught with dangers..........

04-16-2008, 02:29 PM	#2
LaFemmes Queen Bee Join Date: Mar 2008 Location: PA Moto: 2003 R6 Posts: 418	http://www.yamahafz1oa.com/forum/ __________________ www.myspace.com/lafemmes If you cannot win, make the one ahead of you break the record!

04-17-2008, 02:15 AM	#3
Gas Man Trip's Assistant Join Date: Feb 2008 Location: Imported from Detroit Moto: 2009 HD Street Classic Posts: 12,149	That's not nearly enough info... What was the running temp when this happened? What did he do to winterize it? Who did the oil cooler repair? Was it repaired on the bike or off? Was there any damage to the coolant rad? Are all the hoses properly attached? Did he criss cross the tubes during this? __________________ -Chris "Why pay somebody else to fuck up your bike?" Run Amsoil Product

04-18-2008, 02:12 AM	#5
Gas Man Trip's Assistant Join Date: Feb 2008 Location: Imported from Detroit Moto: 2009 HD Street Classic Posts: 12,149	Do you have a service manual? __________________ -Chris "Why pay somebody else to fuck up your bike?" Run Amsoil Product

04-19-2008, 10:08 PM	#7
Gas Man Trip's Assistant Join Date: Feb 2008 Location: Imported from Detroit Moto: 2009 HD Street Classic Posts: 12,149	Yeah but those 2 coolers should be seperate correct?! __________________ -Chris "Why pay somebody else to fuck up your bike?" Run Amsoil Product

04-19-2008, 10:16 PM	#8
NONE_too_SOFT Chopstix / \ Join Date: Feb 2008 Location: Akron OH Moto: 03 CBR RR Posts: 5,350	people do some weird shit.

04-20-2008, 10:15 AM	#9
OTB The Man Join Date: Feb 2008 Location: CrabTown USA Moto: 00 Bimota DB4 Posts: 823	oil in coolent tank means only come from a couple of sources, none of them good. Oil is getting onto coolent passages..either through a blown head or cylinder gasget, a blown shaft seal somewhere, or he did not have enough antifreeze over winter and there is a crack somewhere in the block, cylinder or head. The presence of coolent leaks near the intakes would lead me to opine that a cylinderhead gasket leak, crack, or warpage has occured. But then, diagnosing stuff over the internet is fraught with dangers..........