Coolest workbench - Page 2

DLIT · 01-13-2011, 04:41 PM

Quote:

Originally Posted by udman

Did this bench last weekend with "leftovers" have a total of $60 invested, of course the laptop and speakers were stuff on hand.

Damn it! I have to go back to work on Monday, after having 30 days off. You've just inspired me, but I don't have the time anymore. I might have to spread it over a few weekends or something. Sick setup.

askmrjesus · 01-13-2011, 08:30 PM

Quote:

Originally Posted by Adeptus_Minor

So, Fred, between you and AMJ, who is the official Jewish carpenter of TWF?

Me, of course.

Do you see me eyeballing workbench porn? Fuck no. If I can't accidentally gouge a hole in the fucking thing without worrying about it, it's not a workbench, it's furniture. Just to be clear, the idea is to make furniture ON the workbench, not the other way around.

Actually though, since you brought it up, Jews make shitty carpenters.

Why?

Because no matter what measurement you give them, the assholes want half off.

JC

udman · 01-13-2011, 09:49 PM

Quote:

Originally Posted by DLIT

Damn it! I have to go back to work on Monday, after having 30 days off. You've just inspired me, but I don't have the time anymore. I might have to spread it over a few weekends or something. Sick setup.

Thanks. I've got step by step pics if you want them when you get ready to build.

derf · 01-13-2011, 11:14 PM

Hells yeh thats an awesome setup.

Anyways, I picked up the wood for the bench tonight, $65 in lumber, another $50 in hardware. Forgot to pick up the wheel casters. Gonna start cutting fingers tomorrow.

Rangerscott · 01-13-2011, 11:23 PM

Ya'll and your fancy smancy work benches. Mine has served me well over the years.

Even has attachments.

Hell I even have mini work benches. Ya. The strap is there for a reason.

I got a great idea of putting two together.

DLIT · 01-14-2011, 11:23 AM

Wow.

derf · 01-14-2011, 11:28 AM

Quote:

Originally Posted by DLIT

Wow.

C'mon, you haven't had a shitty workbench before? I have, and they always work fine, but it's nice to have a dedicated specialized bench to work on.

Hydrant · 01-14-2011, 12:01 PM

There is a project that I'm working on where we have to do some demolition work. Inside the building there is a 10'x10' x 2" thick piece of plate with I-beams for legs that is about 36" tall. If I can get it out of the building easily, it's either going to our shop or our farm. If it's a bitch its going to the scrap yard.

At the house I just have a little bench that is some old butcher block that's like 4' x 2', in the garage. Usually it is loaded with stuff so it never sees any use.

derf · 01-16-2011, 08:01 PM

I actually got a little farther than this, in fact other than putting a wooden face on the vice, and bolting the top down it's done. It weighs about 200 lbs but with the four wheel casters it rolls pretty easily. I'll wheel it out tommorrow and take some better pictures. I'm still deciding if I want to raise it another few inches, it's just bellow hip height.

Here it is while I was gluing the tail vice on the front.

The whole table

The front vice

The tail vice. The block on the left can pull right out and move over and drop into any one of the other holes along the front of the table.

01-13-2011, 11:14 PM	#14
derf token jewboy Join Date: Nov 2008 Moto: CBR 900, KLR ugly ass duckling, Gas Man Posts: 10,799	Hells yeh thats an awesome setup. Anyways, I picked up the wood for the bench tonight, $65 in lumber, another $50 in hardware. Forgot to pick up the wheel casters. Gonna start cutting fingers tomorrow. __________________

01-14-2011, 11:23 AM	#16
DLIT Clit Commander Join Date: Feb 2008 Location: Las Vegas Moto: 2012 Ducati 1199 Panigale S Posts: 4,189	Wow. __________________ Dress for the crash. Not the ride.

01-14-2011, 12:01 PM	#18
Hydrant WERA Yellow Plate Join Date: Dec 2008 Location: Cincinnati, Ohio Moto: 2003 Suzuki TL1000R, 2002 Honda CBR 600 F4i Posts: 660	There is a project that I'm working on where we have to do some demolition work. Inside the building there is a 10'x10' x 2" thick piece of plate with I-beams for legs that is about 36" tall. If I can get it out of the building easily, it's either going to our shop or our farm. If it's a bitch its going to the scrap yard. At the house I just have a little bench that is some old butcher block that's like 4' x 2', in the garage. Usually it is loaded with stuff so it never sees any use. __________________

01-16-2011, 08:01 PM	#19
derf token jewboy Join Date: Nov 2008 Moto: CBR 900, KLR ugly ass duckling, Gas Man Posts: 10,799	I actually got a little farther than this, in fact other than putting a wooden face on the vice, and bolting the top down it's done. It weighs about 200 lbs but with the four wheel casters it rolls pretty easily. I'll wheel it out tommorrow and take some better pictures. I'm still deciding if I want to raise it another few inches, it's just bellow hip height. Here it is while I was gluing the tail vice on the front. The whole table The front vice The tail vice. The block on the left can pull right out and move over and drop into any one of the other holes along the front of the table. __________________

01-13-2011, 11:23 PM	#15
Rangerscott Viff6N Mutated Warrior Join Date: Mar 2009 Location: Texas Moto: '01 Honda VFR 800 & '09 ER-6N Posts: 8,704	Ya'll and your fancy smancy work benches. Mine has served me well over the years. Even has attachments. Hell I even have mini work benches. Ya. The strap is there for a reason. I got a great idea of putting two together.