2006 XB12R electrical issue??? - Page 2

Amber Lamps · 12-10-2012, 09:33 PM

I'm assuming that you have the bike in neutral.... I would look into a clutch switch for sure. Have you tried push starting it?

RedRider2k2 · 12-10-2012, 09:43 PM

Quote:

Originally Posted by dReWpY

I bought new relays and swtitched them out... nothing. Is there another fuse box other then the one in the front right upper fairing that i am missing?

So did you come across more fuses? Or at least properly check the ones you found? I'm still leaning towards the Kill Switch circuit/Ignition Fuse. It's the most likely thing to stop the pump and starter.

OneSickPsycho · 12-11-2012, 06:08 PM

Email al at americansportbike.com

Cutty72 · 12-11-2012, 07:46 PM

Quote:

Originally Posted by RedRider2k2

I hate to point out the obvious of course...But make sure your Kill Switch is in the right position too.

Was my first thought

Quote:

Originally Posted by OneSickPsycho

Email al at americansportbike.com

Good call, he is very knowledgeable on the Buells, especially the XB's.

I also second the low battery thing. On my 1125, everything worked as normal when I turned the key, but hit the starter and nothing, no click, no attempt to crank, just dead. Hook up the battery charger and it fired right up.

OneSickPsycho · 12-12-2012, 07:58 AM

If the battery is really fucked, hooking it to a charger might not work. Pull the battery completely, and run jumpers to your Jeep's batt.

Cutty72 · 12-12-2012, 01:08 PM

Quote:

Originally Posted by OneSickPsycho

If the battery is really fucked, hooking it to a charger might not work. Pull the battery completely, and run jumpers to your Jeep's batt.

Or hook the charger directly to the cables, same difference.

OneSickPsycho · 12-12-2012, 02:29 PM

Quote:

Originally Posted by Cutty72

Or hook the charger directly to the cables, same difference.

Depends on the charger... My shitball HF doesn't source enough...

Rangerscott · 12-12-2012, 06:17 PM

I took apart my vfr's right controls and cleaned off the kill switch contacts. A little tarnished. My starter button wasnt fully releasing so fixed that too.

To rule out the pump you can directly wire it to your battery and see if it comes on.

Cutty72 · 12-12-2012, 08:06 PM

Quote:

Originally Posted by OneSickPsycho

Depends on the charger... My shitball HF doesn't source enough...

Yeah, mine has enough juice to crank my diesel when it's cold... it can handle the bike

Rangerscott · 12-22-2012, 12:07 PM

Update?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-10-2012, 09:33 PM	#11
Amber Lamps Moto GP Star Join Date: Mar 2008 Posts: 14,556	I'm assuming that you have the bike in neutral.... I would look into a clutch switch for sure. Have you tried push starting it?

12-11-2012, 06:08 PM	#13
OneSickPsycho Ride Like an Asshole Join Date: Feb 2008 Moto: nothing... Posts: 11,254	Email al at americansportbike.com

12-12-2012, 07:58 AM	#15
OneSickPsycho Ride Like an Asshole Join Date: Feb 2008 Moto: nothing... Posts: 11,254	If the battery is really fucked, hooking it to a charger might not work. Pull the battery completely, and run jumpers to your Jeep's batt.

12-12-2012, 06:17 PM	#18
Rangerscott Viff6N Mutated Warrior Join Date: Mar 2009 Location: Texas Moto: '01 Honda VFR 800 & '09 ER-6N Posts: 8,704	I took apart my vfr's right controls and cleaned off the kill switch contacts. A little tarnished. My starter button wasnt fully releasing so fixed that too. To rule out the pump you can directly wire it to your battery and see if it comes on.

12-22-2012, 12:07 PM	#20
Rangerscott Viff6N Mutated Warrior Join Date: Mar 2009 Location: Texas Moto: '01 Honda VFR 800 & '09 ER-6N Posts: 8,704	Update?