05-04-2008, 04:38 PM | #1 |
WSB Champion
Join Date: Feb 2008
Location: Springfield, MO
Posts: 7,146
|
Another in the running for a new bike
Luckily for me, my reason for looking for a new bike isn't the same as NtS's. I feel like I am ready to move up from the blast to something bigger. I am looking to spend 3500-4000 for a new bike. I would love to be able to get an 03 600rr or r6, but don't think I will be able to swing that kind of money unless I find a great deal. Right now the prime candidate is a 97 gsxr 750. My neighbor owned it, traded it to his friend for something, and his friend is too afraid to ride it, meaning it has been sitting for the last 8 months. His friend wants to learn to ride though, so I've talked to him some about trading my bike + some cash for his.
Current bike is a 02 buell blast with 2300 miles on it. Scratched up a little bit cuz it was a HD riding course bike for 3 years (explains the low miles.) It has brand new tires on it too. Bike I am looking at is a 97 gsxr 750 with 35K miles. My neighbor said it will need a new back tire, small dent in the gas tank which can be covered by a tank bag, and some of the decals are starting to come up a little on the front. It has Yoshi exhaust and a yellow windscreen, with a yellow low beam. I don't think there is anything else done to it. He doesn't know a ton about bikes, so I can convince him the prices are a little different than they really are. My guess is that I will be able to trade him bike bike + 6-7 hundred cash. Sound like a good deal to you guys? Anything I should know about that year/model of bike that you have had experience with? |
05-04-2008, 04:46 PM | #2 |
CMDLINE
Join Date: Feb 2008
Location: Huntsville, AL
Moto: 2008 Black/Grey Hayabusa
Posts: 1,406
|
Doesn't sound like *too* bad of a deal at all.
So he doesn' tride it cause he's scared? Hrmm. Did he lay it down???? Being able to hook up that deal, get an upgrade, and let go of your old one all at the same time could make things pretty easy for you ,and you'd still have some $$$ left over to upgrade/get gear.... |
05-04-2008, 04:49 PM | #3 | |
WSB Champion
Join Date: Feb 2008
Location: Springfield, MO
Posts: 7,146
|
Quote:
As far as gear, I am asking for a Teknic 1-piece suit for my b-day on may 22. and teknic gauntlets from my grandma that are only 35. I have JR meteor boots and a exo-400 helmet. I would probably do a little in upgrades, but not a ton for now. |
|
05-04-2008, 06:07 PM | #4 |
Chopstix / \
Join Date: Feb 2008
Location: Akron OH
Moto: 03 CBR RR
Posts: 5,350
|
hell even if you drop a bike in grass its usually all okey dokey.... dont ask me how i know.
|
05-04-2008, 06:15 PM | #5 |
Leather and Lace
Join Date: Feb 2008
Location: Goleta, Ca
Moto: 2005 R6
Posts: 1,810
|
|
05-04-2008, 06:35 PM | #6 |
WSB Champion
Join Date: Feb 2008
Location: Springfield, MO
Posts: 7,146
|
|
05-04-2008, 06:39 PM | #7 |
Let go of my ears.
Join Date: Feb 2008
Location: Jacksonville, FL
Moto: '03 GSX-R600, '04 625SMC
Posts: 1,394
|
It's a good bike, with that many miles it's due a couple valve-checks, if you can get some reciepts for service that'd be a bonus. Also, I would take the bike to a shop and have them check it out, 11 years and 35k miles some things start to wear out. Also, first thing I do with a new bike is change the oil/fluids, you should too.
If I were you, and if you have the cash, I would give the motor and chassis a complete and very thorough tune-up, because 11 years is a long time, and 35k is a significant amount of miles. In this order of importance I would replace the brake fluid/pads on the front, motor tune-up (clean/synch carbs and new plugs), get the forks redone with new seals/oil, new steering head bearings, have the shock rebuilt, swingarm pivot bushings/bearings, and possibly some new wheel bearings too. If you have the extra cash I would recommend upgrading the suspension while you're at it, RaceTech makes very good re-valving kits for the GSXR about about $140 for the forks and $140 for the shock, and get a set of fork springs that are right for your weight. I know it sounds like a lot, and it is, which is why I listed it in the order I would recommend doing it, but the difference in the feel and ride of the bike will be like night and day. If you do all that then the bike should ride like a brand new bike. |
05-04-2008, 06:46 PM | #8 |
Leather and Lace
Join Date: Feb 2008
Location: Goleta, Ca
Moto: 2005 R6
Posts: 1,810
|
He loves it. He has had his current one for 7 years and before that he had an identical one for 13 months...that one did not make it....
I do not think he has had any major issues with it. He does all the work on it himself...if he has the right tools. I doubt he will ever get rid of that bike. It is worth so much more to him than it will ever be to anyone else. He is out working on my car right now but I will ask him if there is anything to watch for on that year bike when he get in. |
05-04-2008, 07:05 PM | #9 |
The Man
Join Date: Feb 2008
Location: CrabTown USA
Moto: 00 Bimota DB4
Posts: 823
|
To answer your question; I would do the above, as well as check two other things:
A. Compression test. No doubt you will have lost a bit, but what you are really looking for is the differential between cylinders; you don't want more than 10-12 psi difference between them. Any more than that and it indicates valve and/or ring issues. B. I would replace the cam chain and tensioner on that motor, as flailing cam chains were about the only problems ever found on high-milage examples of those bikes and you really don't know the level of care it has received. I would also have the current owner start the bike cold, with you standing off to the side/rear, and watch the exhaust. A blue puff on cold startup indicates oil is leaking down into the cylinder(s) while the bike sits. This is indicative of worn valve guides. Those are about the only things to watch for outside of the norm. |
05-04-2008, 07:08 PM | #10 |
Ride Like an Asshole
Join Date: Feb 2008
Moto: nothing...
Posts: 11,254
|
Damnit OTB, you ARE the man.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|