Go Back   Two Wheel Fix > In the Garage or Shop > Mechanical or Tech

Reply
 
Thread Tools Display Modes
Old 05-28-2008, 02:14 AM   #161
ceo012384
Pompous Prick
 
ceo012384's Avatar
 
Join Date: Mar 2008
Location: MA
Moto: 06 R6 (race), 04 CRF Tard (race)
Posts: 3,040
Default

This long weekend I was able to get a lot of the final things done. I'm really psyched right now. Most of these things didn't require a ton of work, but they make such a huge difference towards the appearance of being done that it really looks great now.

I did the final coat of paint all around. I also repainted parts of all three of the thresholds in black, since they got joint compound and/or paint on them. Other little black trim stuff outside was also given another coat. Here's the final coat of paint:









Intermittently I threw on all of the faceplates for the outlets and switches.

Next, I installed the diamond plate baseboard. I was able to do the whole main room with it. I couldn't do the one piece of wall I wanted to do in the small room because there were a couple pieces missing from the order, so I alerted the company and they will be here this week. Besides that, the people were nice and attentive (diamondlife I think the company is called) and also, the stuff looks great!!! Here's the parts that I did:







I used an aluminum-colored caulking meant for trim work to seal the baseboard to the floor all around the room. This means for washing the floor I never have to worry about moisture getting up under the wall, into the drywall and the wood. I could literally fill the room up with 4 inches of water. Here's a closeup of the caulking sealing the baseboard to the floor:



I installed shelving on all the walls in the small room. On the left are 8" deep shelves, the back wall has 12" deep shelves, and the whole right wall on either side of the doorway has 10" deep shelves.



Here's a little bling I had lying around... a couple old street signs. The bike route sign is from chicago, forget how I came into that. I used a concrete nailer to hang 'em:



Because of the low overhang between rooms, I decided to paint some caution stripes on the threshold. Several people (including me once, forgetting to duck) had already hit their head. So I just measured off a bunch of stripes with a ruler and pencil, taped it up with painter's tape, and used some high gloss red paint:



Later, I pulled away the tape, and it came out pretty nicely I think:





Next, I decided to take care of some more shelves in a few places. Since the shelves on the right wall in the small room are 10" deep, they protrude into the doorway a little bit. Thus, I figured I could utilize the space on the wall in the threshold between rooms.

I don't like having tons of bottles and aerosol cans everywhere and not being able to find them when I need them, so I designed and built a little rig to hold them:



I also cut some plywood shelves for the speakers and my stereo. I painted those and the shelves I made for the cans/bottles:





Then I installed the can rig I dreamt up. It fit pretty well and looks like it will be very handy:



Also installed the shelves for the speakers and stereo, and wired up the speaker wire outlets they will all utilize:







This last picture was right after I used a floor degreaser called greaseaid, a bristle brush on my hands and knees, and rags to clean the floor. That drywall dust is really ground in there pretty badly. I'm a little pissed about this, but I'm not sure it's worth the effort to get it all off right now since eventually I will need to prep the surface in both rooms for adherance of an epoxy floor coating when I have the time and money to do it. That will probably occur this fall. That is, unless someone has an easy solution for cleaning the floor that I could do quickly soon.
ceo012384 is offline   Reply With Quote
Old 05-28-2008, 02:14 AM   #162
ceo012384
Pompous Prick
 
ceo012384's Avatar
 
Join Date: Mar 2008
Location: MA
Moto: 06 R6 (race), 04 CRF Tard (race)
Posts: 3,040
Default

Then, here's another trick I had up my sleeve... hung up this bad boy:



Then I opened up the craftsman roller chests I bought three or so months ago, finally. I bought them at that time because they were on a killer sale but haven't been able to bring them into the garage obviously. The 5-drawer top chest had been damaged from the manufacturer/shipper, the lid wouldn't close and when put down on level ground it wobbled. I had to take that back to sears and get a replacement. They gave me no trouble at all and gave me a brand new one in exchange right away. After that hiccup, I got them all set up. When everything is in place, the lid of the top chest JUST clears the recessed lighting boxes I built. Yeah, I planned it that way carefully... right... haha. Here's the chests:



All the tool companies charge an arm and a leg for drawer liners for tool chests, like $20 a roll. I found rolls at harborfreight for $3, and got 11 rolls. This is enough to do all of my toolchests as well as the drawers that will be in my workbench when I build it. I test cut one drawer and the stuff is great, just as good quality as the craftsman (and others) drawer liners, nice and sticky, etc. Good way to save money for those of you who need some liners:



Then I started bringing stuff in from the main basement, like the bike and stands, my jack and jackstands, backup (old) tires, gas,more of my tools, etc. This is the garage in it's current state as I left it at the end of the weekend... basically 95% done!!!!!!!!!!






There is a bunch left to do, but for the most part, it's the way I want it.


Short term to-do's:

- Design and build workbench (I have a plan for this, just need to do it)
- Procure man-fridge to fit under said workbench to harbor tasty adult beverages (this is a HUGE necessity )
- Get everything out of the main basement that is mine, and get it organized and onto shelves and into tool chests
- Hang some hooks on the east wall for hanging up all my leathers and riding gear
- Finish the plumbing: right inside the main basement near the black door, install a big shop sink. Also, finish hooking up the outside faucet for washing cars/bike so the hose doesn't need to be drug out there every time.


Long-term to-do's:

- Grind/sand/etc concrete floor in both rooms, acid wash it, then apply medium gray epoxy base, then red/white/black paint flakes, then a nice think clear epoxy topcoat
- Buy a compressor, pour a concrete slab for it outside and build a 'doghouse' for it to 'live' in, plumb the air line in through the wall near the heater
- Tackle the main basement... lots of organization, trashing, and a little lighting/electrical work in there. Nothing anywhere near close to the work in the garage though. I'll take a break for now






And it's not COMPLETELY done yet, but I can't help look back at this picture and compare:









Next weekend I will be doing a little bit on the garage, but it will mostly be related to packing for my trip and prepping the bike (this will include an onboard camera setup ) for the trip and all the track days involved. I will be gone for about two weeks, doing at least 3 track days, 5 days in deal's gap, 4 or 5 relaxing in SC, driving 2500-ish miles with the bike on the trailer, and doing a 1-day work thing on the way back. Extremely psyched for this trip.
ceo012384 is offline   Reply With Quote
Old 05-28-2008, 02:44 AM   #163
Captain Morgan
Let's do another U-turn
 
Captain Morgan's Avatar
 
Join Date: Feb 2008
Location: Indiana
Moto: 2009 V-Strom
Posts: 3,816
Default

That garage looks fucking killer. How pissed would you be if your parents decided to sell the house?
Captain Morgan is offline   Reply With Quote
Old 05-28-2008, 02:52 AM   #164
ceo012384
Pompous Prick
 
ceo012384's Avatar
 
Join Date: Mar 2008
Location: MA
Moto: 06 R6 (race), 04 CRF Tard (race)
Posts: 3,040
Default

Quote:
Originally Posted by Captain Morgan View Post
That garage looks fucking killer. How pissed would you be if your parents decided to sell the house?
Thanks dude!

And yeah that would be funny. It's their office building, actually... but yeah... they won't ever sell it... and then it will be handed down to me. I could always condo the place out if we wanted to sell it so I could retain the garage
ceo012384 is offline   Reply With Quote
Old 05-28-2008, 04:39 AM   #165
Mr Lefty
TWFix Legend
 
Mr Lefty's Avatar
 
Join Date: Feb 2008
Location: Denver CO
Moto: 01 BMW F650GS Dakar
Posts: 15,677
Default

fuck if you did sell it... you just added a bunch of money to the price of the place


but damn... shit looks pimp bro! good work!
Mr Lefty is offline   Reply With Quote
Old 05-28-2008, 09:05 AM   #166
marko138
DefenderOfTheBuelliverse
 
marko138's Avatar
 
Join Date: Feb 2008
Location: Parts Unknown
Moto: Buell XB12R
Posts: 18,585
Default

Nice job man. Looks great.
__________________


Quote:
Grandma said she doesn't want you here when she gets back because you've been ruining everybody's lives and eating all our steak.
marko138 is offline   Reply With Quote
Old 05-28-2008, 12:30 PM   #167
t-homo
WSB Champion
 
Join Date: Feb 2008
Location: Springfield, MO
Posts: 7,146
Default

Good work man.
t-homo is offline   Reply With Quote
Old 05-28-2008, 01:58 PM   #168
Gas Man
Trip's Assistant
 
Gas Man's Avatar
 
Join Date: Feb 2008
Location: Imported from Detroit
Moto: 2009 HD Street Classic
Posts: 12,149
Default

That looks FUCKIN AWESOME!!!!!
__________________
-Chris



"Why pay somebody else to fuck up your bike?"
Run Amsoil Product
Gas Man is offline   Reply With Quote
Old 05-28-2008, 03:34 PM   #169
ceo012384
Pompous Prick
 
ceo012384's Avatar
 
Join Date: Mar 2008
Location: MA
Moto: 06 R6 (race), 04 CRF Tard (race)
Posts: 3,040
Default

Quote:
Originally Posted by Ebbs15 View Post
but damn... shit looks pimp bro! good work!
Quote:
Originally Posted by marko138 View Post
Nice job man. Looks great.
Quote:
Originally Posted by t-rock View Post
Good work man.
Quote:
Originally Posted by Gas Man View Post
That looks FUCKIN AWESOME!!!!!
Thanks guys!!!

Pretty psyched about it. Stuff left to do, like I said, but none of it is a pain. Just fun stuff.
ceo012384 is offline   Reply With Quote
Old 05-28-2008, 03:35 PM   #170
dubbs
Multistrada
 
dubbs's Avatar
 
Join Date: Mar 2008
Location: Manorville, NY
Posts: 652
Default

Shit definitely looks sick, Comparrison of those two pics reminded me of the first time I saw that pic.. Never thought it could look that good..

See ya on Monday!
__________________
Sportbike - 2013 Ducati Multistrada S Touring - Red
Luxury Car - 2013 Cadillac ATS 2.0 Turbo - Black
Weekend Car - 2003 Honda S2000 - Black
Daily Driver - 2011 Toyota Prius - Black
Beater - 2005 Honda Civic Hybrid - Dust Colored
dubbs is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:46 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.