hammer + bent bar end = no fun - Page 2

ceo012384 · 08-20-2008, 05:26 PM

You can't put a wheel on a racetrack without case covers.

The woodcrafts don't wear through. The stock ones do.

About the suspension, yeah, I'm sure it's great... but you're not faster than stock suspension... and that shit is mad $$.

Trip · 08-20-2008, 05:28 PM

Quote:

Originally Posted by ceo012384

You can't put a wheel on a racetrack without case covers.

The woodcrafts don't wear through. The stock ones do.

I'm not racing, why do I care? I am about cost effective riding, it doesn't make sense for me to buy something that costs more to replace instead of using the money to something more important to me.

Gas Man · 08-23-2008, 10:18 PM

Dnyce · 08-24-2008, 05:56 AM

Quote:

Originally Posted by Trip

Whoever told you that doesn't have enough money for suspension. The right suspension is a thing of wonder. Plus I have done adjusted the best I could to the stock shit and it is still not right for me.

Quote:

Originally Posted by ceo012384

About the suspension, yeah, I'm sure it's great... but you're not faster than stock suspension... and that shit is mad $$.

i notice suspension keeps coming up lately-are u guys talkin about having racetech redo the guts of your forks, and revalve/re spring the rear....or are u talking about going all out with ohlins forks and shocks, doin that? big price difference...

cuz it would seem having the susp setup perfectly for u would make the bike easier to ride, and therefore make u faster, and it seems for some ppl, that perfect setup is outside the realm of the factory supplied equipment.

also seems like it could be one of those upgrades that u cant appreciate until u have it.... kinda like an extended swingarm if you're drag racing

ceo012384 · 08-24-2008, 10:45 PM

Quote:

Originally Posted by Dnyce

i notice suspension keeps coming up lately-are u guys talkin about having racetech redo the guts of your forks, and revalve/re spring the rear....or are u talking about going all out with ohlins forks and shocks, doin that? big price difference...

cuz it would seem having the susp setup perfectly for u would make the bike easier to ride, and therefore make u faster, and it seems for some ppl, that perfect setup is outside the realm of the factory supplied equipment.

also seems like it could be one of those upgrades that u cant appreciate until u have it.... kinda like an extended swingarm if you're drag racing

In general the rear shock is replaced, not rebuilt. This can run anywhere from 800 to 1500 dollars.

The stock forks are usually pretty good and can get by with a rebuild. You get new springs and valving. Springs and valves aren't that expensive especially if you can do it yourself, it's like 400 bucks I think. Paying someone to rebuild them adds a couple hundred.

You can go with a full cartridge replacement on the forks as a step above.

The top top step is to get new gas charged forks if you're a baller. This ranges from around 2grand to rebuild your that way to up to 10 grand for the top ohlins full replacement shit.

No one on this board needs the top forks... Usually people drop about 2gs and up on suspension work. Ohlins rear shock and revalve/respring the forks. When I eventually do it that's what I'll do.

Trip · 08-24-2008, 10:56 PM

Quote:

Originally Posted by ceo012384

In general the rear shock is replaced, not rebuilt. This can run anywhere from 800 to 1500 dollars.

The stock forks are usually pretty good and can get by with a rebuild. You get new springs and valving. Springs and valves aren't that expensive especially if you can do it yourself, it's like 400 bucks I think. Paying someone to rebuild them adds a couple hundred.

You can go with a full cartridge replacement on the forks as a step above.

The top top step is to get new gas charged forks if you're a baller. This ranges from around 2grand to rebuild your that way to up to 10 grand for the top ohlins full replacement shit.

No one on this board needs the top forks... Usually people drop about 2gs and up on suspension work. Ohlins rear shock and revalve/respring the forks. When I eventually do it that's what I'll do.

No one needs a lot of shit, but they do it anyway. Does anyone not racing pro really need an exhaust and a pc3? Fuck no, but people do that as the first mod anyway. Suspension is considered a much better use of money anyway. You can get a great penske and respring thicker oil your forks for the same price. Especially for some members of the board where you aren't a 155 lbs person. If you are over like 190, the stock suspension is not good for you on a 600 if you can even get it close to in range, you are lucky.

ceo012384 · 08-24-2008, 10:58 PM

Quote:

Originally Posted by Trip

No one needs a lot of shit, but they do it anyway. Does anyone not racing pro really need an exhaust and a pc3? Fuck no, but people do that as the first mod anyway. Suspension is considered a much better use of money anyway. You can get a great penske and respring thicker oil your forks for the same price. Especially for some members of the board where you aren't a 155 lbs person. If you are over like 190, the stock suspension is not good for you on a 600 if you can even get it close to in range, you are lucky.

I am not saying people shouldn't do suspension... I will do it eventually for sure.

I was just saying the 10k ohlins superbike forks are insane.

I want to pick up used stuff eventually and just freshen it up with oil and seals... should save lots of money.

Gunther1000 · 08-25-2008, 05:36 PM

and for most bikes, A pcIII will help driveablilty. Did for mine at the on/off throttle snatch.

Trip · 08-25-2008, 05:41 PM

Quote:

Originally Posted by Gunther1000

and for most bikes, A pcIII will help driveablilty. Did for mine at the on/off throttle snatch.

1000s are a different animal all together from 600s. PCIII doesn't really do much for a 600 unless you get a full and your map totally doesnt match and really bogs your bike down.

Gunther1000 · 08-26-2008, 09:56 AM

Quote:

Originally Posted by Trip

1000s are a different animal all together from 600s. PCIII doesn't really do much for a 600 unless you get a full and your map totally doesnt match and really bogs your bike down.

You are probably right, I couldn't see a 600 really having that abrupt grab coming back on the gas that mine had. Well still has but not nearly as bad.

I just would think a guy with any new fuel injected bike would stand to gain over the stock EPA friendly factory settings but I would have no clue as to a 600. I have only rode 3 in my life and not for very long. Never owned one... Bored the shit out of me. Now I would like to try one on the tight shit. It would be a lot easier to ride fast I think. But I Would still like to own a 250 2-stroke for just that.
But as you know the benifit of a 4 strokes maintenance scheduel is a lot more user friendly...

08-20-2008, 05:26 PM	#11
ceo012384 Pompous Prick Join Date: Mar 2008 Location: MA Moto: 06 R6 (race), 04 CRF Tard (race) Posts: 3,040	You can't put a wheel on a racetrack without case covers. The woodcrafts don't wear through. The stock ones do. About the suspension, yeah, I'm sure it's great... but you're not faster than stock suspension... and that shit is mad $$. __________________ LRRS/CCS #123 Boston Moto Dunlop Woodcraft 35 Motorsports Sidi Pit Bull K&N Filters

08-23-2008, 10:18 PM	#13
Gas Man Trip's Assistant Join Date: Feb 2008 Location: Imported from Detroit Moto: 2009 HD Street Classic Posts: 12,149	__________________ -Chris "Why pay somebody else to fuck up your bike?" Run Amsoil Product

08-25-2008, 05:36 PM	#18
Gunther1000 Jesus Christ! Join Date: Jul 2008 Moto: (The Chi's lover) Posts: 801	and for most bikes, A pcIII will help driveablilty. Did for mine at the on/off throttle snatch. __________________ FTP