Go Back   Two Wheel Fix > In the Garage or Shop > Mechanical or Tech

Reply
 
Thread Tools Display Modes
Old 05-13-2012, 11:22 PM   #1
No Worries
Keyboard Racer
 
No Worries's Avatar
 
Join Date: Feb 2008
Location: Mile High City
Moto: Old Superbikes
Posts: 1,016
Default Heat Wrap

My friend has a 650 V-Strom. The front cylinder's exhaust pipe is a 1/4 inch at the bottom from the oil cooler.



We decided to wrap the pipe with fiberglass heat wrap. We used gloves to avoid the glass fibers. We put the black fiberglass in water first and then wrapped. What a mess. We used pipe clamps to keep the ends of the wrap from unraveling.


The next day he took the bike out and the gauge registered hotter. We cut the fiberglass off after that. We're not sure why the bike didn't run cooler.
No Worries is offline   Reply With Quote
Old 05-14-2012, 12:55 AM   #2
askmrjesus
Soul Man
 
askmrjesus's Avatar
 
Join Date: Nov 2008
Location: Everywhere, all the time.
Moto: '0000 Custom Turbo Cross (with jet kit).
Posts: 6,481
Default

Quote:
Originally Posted by No Worries View Post

The next day he took the bike out and the gauge registered hotter. We cut the fiberglass off after that. We're not sure why the bike didn't run cooler.
Exhaust wrap is actually meant to increase the exhaust and header gas temps.

Since an engine is basically a big air pump, the faster you can move the air, the faster the engine goes, (up to a point).

The idea behind exhaust wrap, is to heat the exhaust so that the density of the exhaust decreases. The lower the density, the faster lower temp intake gases will flow towards it. It's like wind at the beach. The hotter the land mass, the faster the wind will blow cooler air on shore.

Problem is, the hotter exhaust gas, means a hotter pipe, which means a hotter head and cylinder, which means you've gone backwards in the cooling department.

JC
__________________
The way things are going, they're gonna crucify me.
askmrjesus is offline   Reply With Quote
Old 05-14-2012, 09:40 AM   #3
pauldun170
Serious Business
 
pauldun170's Avatar
 
Join Date: Nov 2008
Location: New York
Moto: 1993 ZX-11 2008 CBR1000rr
Posts: 9,723
Default

Quote:
Originally Posted by askmrjesus View Post
Exhaust wrap is actually meant to increase the exhaust and header gas temps.

Since an engine is basically a big air pump, the faster you can move the air, the faster the engine goes, (up to a point).

The idea behind exhaust wrap, is to heat the exhaust so that the density of the exhaust decreases. The lower the density, the faster lower temp intake gases will flow towards it. It's like wind at the beach. The hotter the land mass, the faster the wind will blow cooler air on shore.

Problem is, the hotter exhaust gas, means a hotter pipe, which means a hotter head and cylinder, which means you've gone backwards in the cooling department.

JC
...
Attached Images
File Type: jpg index.jpg (8.6 KB, 57 views)
__________________


Quote:
Originally Posted by Dave View Post
feed your dogs root beer it will make them grow large and then you can ride them and pet the motorcycle while drinking root beer
pauldun170 is offline   Reply With Quote
Old 05-14-2012, 01:16 PM   #4
askmrjesus
Soul Man
 
askmrjesus's Avatar
 
Join Date: Nov 2008
Location: Everywhere, all the time.
Moto: '0000 Custom Turbo Cross (with jet kit).
Posts: 6,481
Default



JC
__________________
The way things are going, they're gonna crucify me.
askmrjesus is offline   Reply With Quote
Old 05-14-2012, 01:47 PM   #5
Particle Man
Custom User Title
 
Particle Man's Avatar
 
Join Date: Nov 2008
Location: Central NY
Moto: 2003 SV650S
Posts: 14,959
Default

Why are you trying to get it to run cooler?
__________________
I'm not "fat."
I'm "Enlarged to show texture."


Handle every stressful situation like a DOG: If you can't eat it or hump it, pi$$ on it & walk away.
Particle Man is offline   Reply With Quote
Old 05-14-2012, 03:28 PM   #6
Captain Morgan
Let's do another U-turn
 
Captain Morgan's Avatar
 
Join Date: Feb 2008
Location: Indiana
Moto: 2009 V-Strom
Posts: 3,816
Default

Have you considered relocating the oil cooler? Many of the skid plates require relocation of the oil cooler to a vertical position at the side. I haven't done that to mine, but know it's a possibility. Touratech sells a relocation kit. Here's a link to the kit on their website. http://www.touratech-usa.com/Store/1...-V-Strom-DL650

Here's a pic of a modified oil cooler that's been relocated as I described.


Last edited by Captain Morgan; 05-14-2012 at 03:38 PM..
Captain Morgan is offline   Reply With Quote
Old 05-15-2012, 12:34 AM   #7
No Worries
Keyboard Racer
 
No Worries's Avatar
 
Join Date: Feb 2008
Location: Mile High City
Moto: Old Superbikes
Posts: 1,016
Default

Quote:
Originally Posted by Particle Man View Post
Why are you trying to get it to run cooler?
Just thought it was bad engineering to have the oil cooler right behind the exhaust pipe. Seems that the cooler was taking in more heat than it was expelling.

Quote:
Originally Posted by Captain Morgan View Post
Have you considered relocating the oil cooler? Many of the skid plates require relocation of the oil cooler to a vertical position at the side. I haven't done that to mine, but know it's a possibility. Touratech sells a relocation kit. Here's a link to the kit on their website. http://www.touratech-usa.com/Store/1...-V-Strom-DL650

Here's a pic of a modified oil cooler that's been relocated as I described.

Thanks Captain, that looks cool.
No Worries is offline   Reply With Quote
Old 05-15-2012, 12:40 AM   #8
No Worries
Keyboard Racer
 
No Worries's Avatar
 
Join Date: Feb 2008
Location: Mile High City
Moto: Old Superbikes
Posts: 1,016
Default

Quote:
Originally Posted by askmrjesus View Post
Exhaust wrap is actually meant to increase the exhaust and header gas temps.

Since an engine is basically a big air pump, the faster you can move the air, the faster the engine goes, (up to a point).

The idea behind exhaust wrap, is to heat the exhaust so that the density of the exhaust decreases. The lower the density, the faster lower temp intake gases will flow towards it. It's like wind at the beach. The hotter the land mass, the faster the wind will blow cooler air on shore.

Problem is, the hotter exhaust gas, means a hotter pipe, which means a hotter head and cylinder, which means you've gone backwards in the cooling department.

JC
That sounds right. He just saw the temp gauge higher. I don't think he noticed if the bike was any faster.
No Worries is offline   Reply With Quote
Old 05-15-2012, 08:30 AM   #9
askmrjesus
Soul Man
 
askmrjesus's Avatar
 
Join Date: Nov 2008
Location: Everywhere, all the time.
Moto: '0000 Custom Turbo Cross (with jet kit).
Posts: 6,481
Default

Quote:
Originally Posted by No Worries View Post
That sounds right. He just saw the temp gauge higher. I don't think he noticed if the bike was any faster.
Any gains in performance would be modest at best.

JC
__________________
The way things are going, they're gonna crucify me.
askmrjesus is offline   Reply With Quote
Old 05-15-2012, 12:32 PM   #10
derf
token jewboy
 
derf's Avatar
 
Join Date: Nov 2008
Moto: CBR 900, KLR ugly ass duckling, Gas Man
Posts: 10,799
Default

Quote:
Originally Posted by askmrjesus View Post
Any gains in performance would be modest at best.

JC
What crack are you smoking? That .05 hp gain from the wrap adds enough go to make rossi run for his money
__________________
derf is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:31 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.