1973 yamaha RD250 for sale/trade $2500 obo

BobTheBiker · 04-05-2009, 02:00 AM

doing this to help a buddy find a newer bike.

he's got a 73 RD250 2 stroke bike, which is road legal, currenty registered and insured, and actually riding around. starts with 1-2 kicks cold right now.

He's put a lot of work into this recently, anything that has color to it is powdercoated, including the fuel tank, rims(chrome powdercoat) both fenders, chain guard, rear sprocket, rear hub, part of the front rotor, and some other parts I dont recall right off.

The rear turn signals were moved much closer to the center and fastened into the tail light bracket, all turn signals are LED, you'll need an electronic flasher relay for them to work right.

DG performance expansion chambers and carbs rejetted for the pipes and pod filters. stock pipes are available if you so desire.

Tires are brand new rubber as well.

needs a new chain/sprocket set and some minor cleaning in the petcock. If I get over there before someone buys/trades, I'll fix the petcock issue.

Not sure of the milage on it, as he's got a tach only setup on it, but the bottom end was rebuilt recently, with 3000 miles at most on the top end. clear title also. Dont know if he has stock gauge cluster for the bike.

Overall, this bike is very much a register and ride machine right now.

Bike is located in New Port Richey FL, about an hour north of tampa.

he is looking for $2500 OBO, or trade for a newer sportbike with clear title in FL. presently registered in Maine, but a trip to the DMV and the title and registration is in your name.

and no the good lookin girl on the bike isnt included, nor even legal for most of you.

sniper · 04-06-2009, 12:37 AM

fuel tank, rims(chrome powdercoat) both fenders, chain guard, rear sprocket, rear hub, part of the front rotor, head light bucket, both levers, upper and lower tripple tree, handlebar mounts, Heads and cylinders, engine covers, one of the 2 side plates (one is plastic and would melt) , most nuts and bolts, battery box, swing arm, dg pipes also powder coated, kick stand, foot break lever, passanger pegs along with driver pegs, headlight bucket ears,

engine is glass beaded and coated

Any questions just ask... putting rd250 clutch back on tomorrow... decided to go to 3 teeth on clutch gear connected to crank... runs like shit... so im goin back to the -3 on crank... and +3 on the clutch basket

here is video of its first start... well first on both cylinders... forgot a plus wire first time

http://www.youtube.com/watch?v=w6eMu5Vd7n8

its been put togeather fully and properly since video so has a head light

Dave · 04-06-2009, 12:49 AM

id be all over this if i had more cashes

sniper · 04-06-2009, 12:52 AM

Quote:

Originally Posted by Dave

id be all over this if i had more cashes

i am takeing trades for a sport bike... doesnt have to be spotless or brand new

Dave · 04-06-2009, 01:09 AM

yeah....thats not happenin lol

tallywacker · 04-06-2009, 01:51 AM

Good luck finding the right buyer.

04-05-2009, 02:00 AM	#1
BobTheBiker too much time on my hands Join Date: Jul 2008 Location: the northern district of god damn Moto: 01 ZX6R, looking for more now. Posts: 1,802	1973 yamaha RD250 for sale/trade $2500 obo doing this to help a buddy find a newer bike. he's got a 73 RD250 2 stroke bike, which is road legal, currenty registered and insured, and actually riding around. starts with 1-2 kicks cold right now. He's put a lot of work into this recently, anything that has color to it is powdercoated, including the fuel tank, rims(chrome powdercoat) both fenders, chain guard, rear sprocket, rear hub, part of the front rotor, and some other parts I dont recall right off. The rear turn signals were moved much closer to the center and fastened into the tail light bracket, all turn signals are LED, you'll need an electronic flasher relay for them to work right. DG performance expansion chambers and carbs rejetted for the pipes and pod filters. stock pipes are available if you so desire. Tires are brand new rubber as well. needs a new chain/sprocket set and some minor cleaning in the petcock. If I get over there before someone buys/trades, I'll fix the petcock issue. Not sure of the milage on it, as he's got a tach only setup on it, but the bottom end was rebuilt recently, with 3000 miles at most on the top end. clear title also. Dont know if he has stock gauge cluster for the bike. Overall, this bike is very much a register and ride machine right now. Bike is located in New Port Richey FL, about an hour north of tampa. he is looking for $2500 OBO, or trade for a newer sportbike with clear title in FL. presently registered in Maine, but a trip to the DMV and the title and registration is in your name. and no the good lookin girl on the bike isnt included, nor even legal for most of you.

04-06-2009, 12:37 AM	#2
sniper Trailer Queen Join Date: Apr 2009 Posts: 15	fuel tank, rims(chrome powdercoat) both fenders, chain guard, rear sprocket, rear hub, part of the front rotor, head light bucket, both levers, upper and lower tripple tree, handlebar mounts, Heads and cylinders, engine covers, one of the 2 side plates (one is plastic and would melt) , most nuts and bolts, battery box, swing arm, dg pipes also powder coated, kick stand, foot break lever, passanger pegs along with driver pegs, headlight bucket ears, engine is glass beaded and coated Any questions just ask... putting rd250 clutch back on tomorrow... decided to go to 3 teeth on clutch gear connected to crank... runs like shit... so im goin back to the -3 on crank... and +3 on the clutch basket here is video of its first start... well first on both cylinders... forgot a plus wire first time http://www.youtube.com/watch?v=w6eMu5Vd7n8 its been put togeather fully and properly since video so has a head light Last edited by sniper; 04-06-2009 at 12:41 AM..

04-06-2009, 12:49 AM	#3
Dave Chaotic Neutral Join Date: Feb 2008 Location: Cherry Hill NJ Moto: GV1200 Madura, Hawk gt Posts: 13,992	id be all over this if i had more cashes __________________ TWF Post whore #6

04-06-2009, 01:09 AM	#5
Dave Chaotic Neutral Join Date: Feb 2008 Location: Cherry Hill NJ Moto: GV1200 Madura, Hawk gt Posts: 13,992	yeah....thats not happenin lol __________________ TWF Post whore #6

04-06-2009, 01:51 AM	#6
tallywacker Virtual Machine Join Date: Mar 2008 Location: PA Moto: 2010 Ducati Hypermotard Posts: 1,698	Good luck finding the right buyer. __________________