okay What the hell

Digifox · 05-12-2009, 03:25 PM

Okay SO, My Head came in yesterday for my EX250. Pulled the old one and threw this on one.

Got the cams put in and torqued the Caps down and somehow there was not...uh....well it wouldnt start so today i pulled the cams out again put #2 on TDC(per the Manual) aligned the cams and tried to start it and Snapped the #6 rocker

Replaced it and put the cams back in (180 off)
Put it back on TDC and flipped the cams...Now its turning over and Sucking in the carbs and blowing out the exhaust....But still no starting....And the #1 plug is dry but #2 is soaked(like #1s intake isnt opening)

Halp Pweas

____
Damn 4-strokes i could have already rebuilt a whole 2stroke engine and been riding

Rider · 05-12-2009, 03:34 PM

Did you check to see if the valve spring and retainer are still in place? Did you visually check to see if the valve was opening and closing?

Digifox · 05-12-2009, 03:39 PM

Quote:

Originally Posted by Rider

Did you check to see if the valve spring and retainer are still in place? Did you visually check to see if the valve was opening and closing?

Yes sir.

After it Locked up when the Rocker snapped i Turned it over by hand after redoing the cams to make sure it was all working right.

Rider · 05-12-2009, 03:49 PM

Do a compression check on 1.

BobTheBiker · 05-12-2009, 05:16 PM

sounds like its turning into a nightmare bike now.

Digifox · 05-12-2009, 07:30 PM

Yes Sir.
Ill do that next

Quote:

Originally Posted by BobTheBiker

sounds like its turning into a nightmare bike now.

Agreed...Damn bike.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

05-12-2009, 03:25 PM	#1
Digifox Cl4p-Trap Join Date: Nov 2008 Location: Columbus, Ohio Moto: Your mom. Posts: 734	okay What the hell Okay SO, My Head came in yesterday for my EX250. Pulled the old one and threw this on one. Got the cams put in and torqued the Caps down and somehow there was not...uh....well it wouldnt start so today i pulled the cams out again put #2 on TDC(per the Manual) aligned the cams and tried to start it and Snapped the #6 rocker Replaced it and put the cams back in (180 off) Put it back on TDC and flipped the cams...Now its turning over and Sucking in the carbs and blowing out the exhaust....But still no starting....And the #1 plug is dry but #2 is soaked(like #1s intake isnt opening) Halp Pweas ____ Damn 4-strokes i could have already rebuilt a whole 2stroke engine and been riding __________________ Firm as cherries.

05-12-2009, 03:34 PM	#2
Rider Moto GP Star Join Date: Feb 2008 Posts: 12,156	Did you check to see if the valve spring and retainer are still in place? Did you visually check to see if the valve was opening and closing?

05-12-2009, 03:49 PM	#4
Rider Moto GP Star Join Date: Feb 2008 Posts: 12,156	Do a compression check on 1.

05-12-2009, 05:16 PM	#5
BobTheBiker too much time on my hands Join Date: Jul 2008 Location: the northern district of god damn Moto: 01 ZX6R, looking for more now. Posts: 1,802	sounds like its turning into a nightmare bike now.