Weatherproof connectors

TommyHotWheel · 11-17-2008, 08:13 PM

Anyone have any tips how to make good re-useable weatherproof connectors? I am looking to upgrade the wiring on my TL and I want to run a good connector instead of cutting and soldering everytime I change out something, like lights. I have a kit of Caspers Weatherpack in mind, the kind used on most OEM cars and trucks, but am open to ideas. Thanks.

Mr Lefty · 11-17-2008, 08:19 PM

a friend of mine had some that he got at AIH (Alaska Industrial Hardware) wished I'd seen what they were called... cool little things though... basicly you strip the wire... strip it... plug it in and it grabs the wire and secures it tight. do the same for the other end... you had to really YANK on the wire to get it out... but you could use the connector over and over again... 100% waterproof too... I'll see if I can find a pic when I get home... don't think I have one... but maybe I can get ahold of him.

Trip · 11-17-2008, 08:33 PM

you can get some at pepboys. Totally buildable where you can buy each individual piece, if you know how to crimp the connections that is. It's costly, but anything weatherproof is going to be costly.

TommyHotWheel · 11-17-2008, 08:47 PM

Quote:

Originally Posted by Trip

you can get some at pepboys. Totally buildable where you can buy each individual piece, if you know how to crimp the connections that is. It's costly, but anything weatherproof is going to be costly.

I found a few 240+ piece kits for around $80 that I could do my entire bike with. I dont really want to slather a bunch of grease on my bike, it seems like a band-aid to me. Ebbs, if you find what they are post up...I'll check them out. Thanks guys.

Gas Man · 11-17-2008, 09:49 PM

Try calling WirePlus in Florida. They do allot of stuff like this. They may eb able to have a harness or at least point you in a decent direction.

Further, you can always take any decent plug and shrink wrap the connections. I have done this on my bike and many many other big dogs. Added security for waterproofing.

azoomm · 11-17-2008, 10:01 PM

Weatherproof, you mean like... Can handle a bit of water like product? You know, my best luck in that department has been in a West Marine or similar boat shop.

HRCNICK11 · 11-17-2008, 08:35 PM

Any good connector and some dielectric grease. I used to use a lot of dielectric grease on my RC51, it solved a ton of electrical gremlins in that bike.

11-17-2008, 08:13 PM	#1
TommyHotWheel Imported from Detroit Join Date: Nov 2008 Location: Michigan Moto: 2001 Suzuki TL1000R Posts: 989	Weatherproof connectors Anyone have any tips how to make good re-useable weatherproof connectors? I am looking to upgrade the wiring on my TL and I want to run a good connector instead of cutting and soldering everytime I change out something, like lights. I have a kit of Caspers Weatherpack in mind, the kind used on most OEM cars and trucks, but am open to ideas. Thanks. __________________ Cry Havok! And let slip the hogs of war!

11-17-2008, 09:49 PM	#5
Gas Man Trip's Assistant Join Date: Feb 2008 Location: Imported from Detroit Moto: 2009 HD Street Classic Posts: 12,149	Try calling WirePlus in Florida. They do allot of stuff like this. They may eb able to have a harness or at least point you in a decent direction. Further, you can always take any decent plug and shrink wrap the connections. I have done this on my bike and many many other big dogs. Added security for waterproofing. __________________ -Chris "Why pay somebody else to fuck up your bike?" Run Amsoil Product

11-17-2008, 10:01 PM	#6
azoomm moderator chick Join Date: Feb 2008 Location: Hill Country TX Moto: Pasta Rockets Posts: 8,917	Weatherproof, you mean like... Can handle a bit of water like product? You know, my best luck in that department has been in a West Marine or similar boat shop. __________________ We have enough youth. How about a fountain of "smart"? Come Play at the Track!! http://www.elitetrackdays.com

11-17-2008, 08:19 PM	#2
Mr Lefty TWFix Legend Join Date: Feb 2008 Location: Denver CO Moto: 01 BMW F650GS Dakar Posts: 15,677	a friend of mine had some that he got at AIH (Alaska Industrial Hardware) wished I'd seen what they were called... cool little things though... basicly you strip the wire... strip it... plug it in and it grabs the wire and secures it tight. do the same for the other end... you had to really YANK on the wire to get it out... but you could use the connector over and over again... 100% waterproof too... I'll see if I can find a pic when I get home... don't think I have one... but maybe I can get ahold of him.

11-17-2008, 08:35 PM	#7
HRCNICK11 Canyon Carver Join Date: Nov 2008 Posts: 429	Any good connector and some dielectric grease. I used to use a lot of dielectric grease on my RC51, it solved a ton of electrical gremlins in that bike.