Can I put a 120/17 70 on an R6?

Kaneman · 03-11-2010, 09:49 PM

Title says it all. I have a spare tire laying around and want to know if I can give it to my bro-in-law to put on his R6...

Phenix_Rider · 03-11-2010, 09:53 PM

Quote:

Originally Posted by Kaneman

Title says it all. I have a spare tire laying around and want to know if I can give it to my bro-in-law to put on his R6...

you mean a 120/70-17? That would be the stock front tire size... Probably a 180/50-17 rear.

EDIT:

Quote:

Tires/Front 120/70-ZR17
Tires/Rear 180/55-ZR17

http://www.yamaha-motor.com/sport/pr...8/0/specs.aspx

Kaneman · 03-11-2010, 09:54 PM

Quote:

Originally Posted by Phenix_Rider

you mean a 120/70-17? That would be the stock front tire size... Probably a 180/50-17 rear.

No I just typed it wrong. Its the front tire, 120/60 17 is what I have.....120/70 17 is stock. My bad.

Phenix_Rider · 03-11-2010, 10:00 PM

A /60 would work, you could adjust the suspension to work with it, but I don't recommend it.

ericr · 03-12-2010, 12:03 AM

Check the fender clearence too, the 120/70 is a tad taller sidewall but it shouldn't be an issue if it has stock fenders.

edit: nevermind, clearence won't be an issue going TO a 120/60

BobTheBiker · 03-12-2010, 02:07 AM

120/60 sucks. I rode on a 65 on a few bikes, HATED IT. felt like trying to steer a lead brick.

120/70 will fit pretty much any modern motorcycle made in the last 23 years if it has a 3.0-3.5"x17 front rim.

Homeslice · 03-12-2010, 06:42 AM

60 series would be absolute junk on an R6

fasternyou929 · 03-12-2010, 11:01 AM

I know the typo has already been pointed out, but now I can't stop picturing an R6 with a 70" wheel on the front.

shmike · 03-12-2010, 11:09 AM

Quote:

Originally Posted by fasternyou929

I know the typo has already been pointed out, but now I can't stop picturing an R6 with a 70" wheel on the front.

It will match his bicycle.

smileyman · 03-12-2010, 11:32 AM

It will never feel right. You could measure from the axle to the ground with the 70 series and then try and lower the forks in the tripple clamps to restore ride height but it would screw with your rake and trail numbers enough that it would feel like crap. My ZX6R came stocke with a 65 series front and I had to adjust the other way to install a 70 series...

03-11-2010, 09:49 PM	#1
Kaneman AMA Supersport Join Date: Nov 2008 Location: Odessa, TX Moto: 2000 Honda CBR1100XX Blackbird Posts: 4,931	Can I put a 120/17 70 on an R6? Title says it all. I have a spare tire laying around and want to know if I can give it to my bro-in-law to put on his R6... __________________ 1982 Honda XR80 - blown motor, 1993 Kawasaki ZX6D - sold, 2001 Suzuki Bandit 1200S - sold, 1984 Honda Magna - sold, 2001 Kawasaki ZRX1200R - blown motor, 2007 Suzuki DL1000 V-Strom - totalled, 2003 Yamaha FZ1 - sold, 1994 Honda Magna - sold, 2001 Honda CBR600F4i - sold, 1998 Suzuki DR350 - stolen, 1989 Honda Super Magna - sold, 2007 Yamaha Stratoliner, 2000 Honda CBR 1100XX Blackbird

03-12-2010, 11:32 AM	#10
smileyman White Trash Hero Join Date: Mar 2008 Location: NW Arkansas Moto: Buell 1125R Porco Rosso Edition Posts: 4,895	It will never feel right. You could measure from the axle to the ground with the 70 series and then try and lower the forks in the tripple clamps to restore ride height but it would screw with your rake and trail numbers enough that it would feel like crap. My ZX6R came stocke with a 65 series front and I had to adjust the other way to install a 70 series... __________________ Arkriders.com To be the best you must first be willing to risk the worst!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-12-2010, 02:07 AM	#6
BobTheBiker too much time on my hands Join Date: Jul 2008 Location: the northern district of god damn Moto: 01 ZX6R, looking for more now. Posts: 1,802	120/60 sucks. I rode on a 65 on a few bikes, HATED IT. felt like trying to steer a lead brick. 120/70 will fit pretty much any modern motorcycle made in the last 23 years if it has a 3.0-3.5"x17 front rim.

03-12-2010, 06:42 AM	#7
Homeslice Elitist Join Date: Nov 2008 Location: SF Bay Area Moto: Gix 750 Posts: 11,351	60 series would be absolute junk on an R6

03-12-2010, 11:01 AM	#8
fasternyou929 SFL Expatriate #2 Join Date: Nov 2008 Location: Raleigh, NC Moto: CBR1000 Posts: 2,043	I know the typo has already been pointed out, but now I can't stop picturing an R6 with a 70" wheel on the front.