Ping Leon

spierce · 12-09-2008, 01:11 PM

hey man i got all the parts for tonight but!

ONE F#@KING SCREW IS F#@KING STRIPED!

so i am hoping that you have a trick up ur sleeve or a welder to weld a socket to it. And do I need to clean the parts or do u have a parts cleaner.

and do you mind if i tag along to watch (if your going to do it tonight)

Or if anyone else has a suggestion. it is the screw that holds the heal guard on to the break side rear set.(bottom srew and a 07 gixer 600)

neebelung · 12-09-2008, 01:48 PM

Quote:

Originally Posted by spierce

...ONE F#@KING SCREW IS F#@KING STRIPED!

Horizontally, or vertically? Are we talking pin-striped, or awning stripes? Inquiring minds want to know!

rogue · 12-09-2008, 02:30 PM

There's a difference?

I got lost after "stripped"

spierce · 12-09-2008, 02:32 PM

? is is a hex screw so i am probably going to drill it out but i need to get the threads out of the brake drum thingy i cant think of what it is called

for the record i am the most hill-billy illiterate person on the plant so sorry thats why i don't post alot. . .

neebelung · 12-09-2008, 02:56 PM

Quote:

Originally Posted by spierce

for the record i am the most hill-billy illiterate person on the plant so sorry thats why i don't post alot. . .

Oh don't sweat it man, I was just pickin on ya.

Sorry I can't help; hope you get it figured out!

spierce · 12-09-2008, 03:14 PM

worst case senario i will drill it out (no pun intended)

Particle Man · 12-09-2008, 03:30 PM

don't worry... it's only a drill.

neebelung · 12-09-2008, 03:40 PM

Quote:

Originally Posted by Particle Man

don't worry... it's only a drill.

BobTheBiker · 12-09-2008, 03:46 PM

do you have a dremel and a cutting wheel for said dremel? if so, dont drill, cut a slot in the screw, and use a flat bladed screwdriving bit with a ratchet. I do this on carburetors and other screws that dislike cooperating, it works very well.

speedylocksmith · 12-09-2008, 04:15 PM

Quote:

Originally Posted by BobTheBiker

do you have a dremel and a cutting wheel for said dremel? if so, dont drill, cut a slot in the screw, and use a flat bladed screwdriving bit with a ratchet. I do this on carburetors and other screws that dislike cooperating, it works very well.

I use that method ALOT when working, and easy outs work well but I haven't used them much

12-09-2008, 01:11 PM	#1
spierce Kneedragger Join Date: Dec 2008 Location: Parkland Moto: 2007 GSXR 600 Posts: 131	Ping Leon hey man i got all the parts for tonight but! ONE F#@KING SCREW IS F#@KING STRIPED! so i am hoping that you have a trick up ur sleeve or a welder to weld a socket to it. And do I need to clean the parts or do u have a parts cleaner. and do you mind if i tag along to watch (if your going to do it tonight) Or if anyone else has a suggestion. it is the screw that holds the heal guard on to the break side rear set.(bottom srew and a 07 gixer 600)

12-09-2008, 02:32 PM	#4
spierce Kneedragger Join Date: Dec 2008 Location: Parkland Moto: 2007 GSXR 600 Posts: 131	? is is a hex screw so i am probably going to drill it out but i need to get the threads out of the brake drum thingy i cant think of what it is called for the record i am the most hill-billy illiterate person on the plant so sorry thats why i don't post alot. . . Last edited by spierce; 12-09-2008 at 02:34 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-09-2008, 03:14 PM	#6
spierce Kneedragger Join Date: Dec 2008 Location: Parkland Moto: 2007 GSXR 600 Posts: 131	worst case senario i will drill it out (no pun intended)

12-09-2008, 03:46 PM	#9
BobTheBiker too much time on my hands Join Date: Jul 2008 Location: the northern district of god damn Moto: 01 ZX6R, looking for more now. Posts: 1,802	do you have a dremel and a cutting wheel for said dremel? if so, dont drill, cut a slot in the screw, and use a flat bladed screwdriving bit with a ratchet. I do this on carburetors and other screws that dislike cooperating, it works very well.