So I ran my bike on the dyno last night

thirdgenlxi · 06-03-2009, 07:59 PM

And I must say.... I'm pretty satisfied with the results! Went to bike night at our local Hooters last night and the guys from Bonz Cycles were there with their dyno.... $20 for HP and top speed runs, or $35 for that + A/F.... for that price I had to try it just to see, lol

It's definitely nothing outstanding, but to see that she was still putting down nearly the same numbers now after 159,300 miles as a new F4i puts out, really not bad! Most of the HP numbers I've seen for F4i's are right around 95-96. Motor is 100% stock and original, other than an APE manual CCT

I had them do the A/F test as well... I knew my PCIII was way outta tune (using the crappy downloaded map now....already knew I needed to get it tuned). As you can see, it's running too lean in the higher RPM's, and blew a cloud of black smoke. But even with that, she still put down 90.45 hp and had a top speed of 151.95 (hits redline)

And a few other pics too..... a buddy was there snapping away, lol

I know, I'm a dork

Oh yea... the guy in the white shirt leaned over aligning the rear wheel, he asked me not once but TWICE if I wanted to sell my bike, and I think he was being serious too! He asked me once before the dyno run and again after.... said he used to have an F4i and absolutely loved it. He has a 600RR now but still misses the F4i and wants another one. After I told him no twice on the sale, he said... "alright...but if you ever get another bike, don't sell the F4i cuz you'll end up regretting it!". Thought that was kinda funny

Time to get her dyno tuned! But I'm still happy to see she's still healthy

BobTheBiker · 06-03-2009, 08:06 PM

SLIGHTLY down from new on power, but I suspect your fuel map has a lot to do with that. for the mileage on her, thats VERY respectable numbers though, so fuck it its runnin like a true Honda.

marko138 · 06-05-2009, 04:47 PM

Nice man. Keep running her.

No Worries · 06-05-2009, 08:22 PM

That's interesting. I'm old school where the dyno used to measure torque and rpm. But they didn't check your rpm, did they? I guess their dyno measures torque and roadspeed to calculate horsepower? Pretty impressive as according to my old magazine articles my CBR1000 put out 108 hp when new.

DLIT · 06-05-2009, 09:20 PM

Nice work. Mine dyno'd at 110.6 last weekend.

ZUKIMON · 06-07-2009, 02:35 AM

159,300 miles!! You are my hero and inspiration man!! Keep up the good work and don't let the Honda down, as it won't let you down.

Antwanny · 06-08-2009, 01:39 AM

And i guess you just did pulls, no custom mapping.

Quote:

Originally Posted by DLIT

Nice work. Mine dyno'd at 110.6 last weekend.

THe TL dynoed at 105 fucking 600s i think i lost my dyno sheet

Side note ive always wondered how dynoes calculate gearing into the equation, taller gearing read less torque and the other way around?

t-homo · 06-08-2009, 01:44 AM

I need to dyno mine sometime soon.

I almost said we should have a dyno competition, but it wouldn't be a competition at all.

Phenix_Rider · 06-08-2009, 07:27 AM

Quote:

Originally Posted by t-rock

I need to dyno mine sometime soon.

I almost said we should have a dyno competition, but it wouldn't be a competition at all.

Not comparing liters to 650s...

t-homo · 06-08-2009, 12:34 PM

No, last I remember, Over200 was claiming 525-550 on a mild tune.

06-03-2009, 07:59 PM	#1
thirdgenlxi They call me a ride whore Join Date: Dec 2008 Location: Mills River, NC Moto: 2004 CBR 600 F4i Posts: 353	So I ran my bike on the dyno last night And I must say.... I'm pretty satisfied with the results! Went to bike night at our local Hooters last night and the guys from Bonz Cycles were there with their dyno.... $20 for HP and top speed runs, or $35 for that + A/F.... for that price I had to try it just to see, lol It's definitely nothing outstanding, but to see that she was still putting down nearly the same numbers now after 159,300 miles as a new F4i puts out, really not bad! Most of the HP numbers I've seen for F4i's are right around 95-96. Motor is 100% stock and original, other than an APE manual CCT I had them do the A/F test as well... I knew my PCIII was way outta tune (using the crappy downloaded map now....already knew I needed to get it tuned). As you can see, it's running too lean in the higher RPM's, and blew a cloud of black smoke. But even with that, she still put down 90.45 hp and had a top speed of 151.95 (hits redline) And a few other pics too..... a buddy was there snapping away, lol I know, I'm a dork Oh yea... the guy in the white shirt leaned over aligning the rear wheel, he asked me not once but TWICE if I wanted to sell my bike, and I think he was being serious too! He asked me once before the dyno run and again after.... said he used to have an F4i and absolutely loved it. He has a 600RR now but still misses the F4i and wants another one. After I told him no twice on the sale, he said... "alright...but if you ever get another bike, don't sell the F4i cuz you'll end up regretting it!". Thought that was kinda funny Time to get her dyno tuned! But I'm still happy to see she's still healthy __________________ *-Jared* Black/Red '04 CBR 600 F4i - 253,500 miles and counting Black '89 Accord LX-i sedan - 435,200 miles still going strong States visited on my F4i facebook.com/thirdgenlxi

06-05-2009, 09:20 PM	#5
DLIT Clit Commander Join Date: Feb 2008 Location: Las Vegas Moto: 2012 Ducati 1199 Panigale S Posts: 4,189	Nice work. Mine dyno'd at 110.6 last weekend. __________________ Dress for the crash. Not the ride.

06-07-2009, 02:35 AM	#6
ZUKIMON Is this thing on? Join Date: Feb 2009 Location: Ashe Co, NC (Near Boone) Moto: '01, 929RR Posts: 398	159,300 miles!! You are my hero and inspiration man!! Keep up the good work and don't let the Honda down, as it won't let you down. __________________ Dirty Harry said there's nothing wrong with a little shooting, as long as the right people get shot.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-03-2009, 08:06 PM	#2
BobTheBiker too much time on my hands Join Date: Jul 2008 Location: the northern district of god damn Moto: 01 ZX6R, looking for more now. Posts: 1,802	SLIGHTLY down from new on power, but I suspect your fuel map has a lot to do with that. for the mileage on her, thats VERY respectable numbers though, so fuck it its runnin like a true Honda.

06-05-2009, 08:22 PM	#4
No Worries Keyboard Racer Join Date: Feb 2008 Location: Mile High City Moto: Old Superbikes Posts: 1,016	That's interesting. I'm old school where the dyno used to measure torque and rpm. But they didn't check your rpm, did they? I guess their dyno measures torque and roadspeed to calculate horsepower? Pretty impressive as according to my old magazine articles my CBR1000 put out 108 hp when new.

06-08-2009, 01:44 AM	#8
t-homo WSB Champion Join Date: Feb 2008 Location: Springfield, MO Posts: 7,146	I need to dyno mine sometime soon. I almost said we should have a dyno competition, but it wouldn't be a competition at all.

06-08-2009, 12:34 PM	#10
t-homo WSB Champion Join Date: Feb 2008 Location: Springfield, MO Posts: 7,146	No, last I remember, Over200 was claiming 525-550 on a mild tune.