Go Back   Two Wheel Fix > General > Cage Hell

Reply
 
Thread Tools Display Modes
Old 10-31-2010, 12:59 AM   #11
Avatard
Crotch Rocket Curmudgeon
 
Avatard's Avatar
 
Join Date: Nov 2008
Location: Here to integrity
Moto: Li'l red baby Ninja
Posts: 7,482
Default

The 'Stang is sitting. The car was fucking perfect. It only needed paint. I'm so bummed it got hit. It got T-boned on the driver's side A pillar. Took out the door, the fender, and the upper ball joint....so it doesn't roll. The smack was just hard enough topside to crack the windscreen, and the footwell is pushed in a bit.

Tell the truth, maybe a good pull on the bottom of the A-pillar on a frame table, a new fender, door, and ball joint, and that thing might actually be OK again.

Unfortunately, I'm no frame expert, so I'm holding onto it for now.

I know it's a real "girl's car" to many, but the MX-5 Miata can swallow the entire drivetrain of that 'Stang ( http://www.monstermiata.com ), and MX-5s in decent rebuildable shape are going for as little as $1500 around here...so I am eying that as an option (as well as a swap of all parts to another Fox body).

If you see a nice 'Velle for cheap, lemme know...but I don't know how I'd get it back to Jersey. I've been considering getting a tow dolly, or trailer...
__________________
Insert free thought here.
Avatard is offline   Reply With Quote
Old 10-31-2010, 01:25 AM   #12
Dave
Chaotic Neutral
 
Dave's Avatar
 
Join Date: Feb 2008
Location: Cherry Hill NJ
Moto: GV1200 Madura, Hawk gt
Posts: 13,992
Default

Quote:
Originally Posted by Avatard View Post
The 'Stang is sitting. The car was fucking perfect. It only needed paint. I'm so bummed it got hit. It got T-boned on the driver's side A pillar. Took out the door, the fender, and the upper ball joint....so it doesn't roll. The smack was just hard enough topside to crack the windscreen, and the footwell is pushed in a bit.

Tell the truth, maybe a good pull on the bottom of the A-pillar on a frame table, a new fender, door, and ball joint, and that thing might actually be OK again.

Unfortunately, I'm no frame expert, so I'm holding onto it for now.

I know it's a real "girl's car" to many, but the MX-5 Miata can swallow the entire drivetrain of that 'Stang ( http://www.monstermiata.com ), and MX-5s in decent rebuildable shape are going for as little as $1500 around here...so I am eying that as an option (as well as a swap of all parts to another Fox body).

If you see a nice 'Velle for cheap, lemme know...but I don't know how I'd get it back to Jersey. I've been considering getting a tow dolly, or trailer...

5.0 miatas are beastly. Nothing girly about that
Dave is offline   Reply With Quote
Old 10-31-2010, 01:35 AM   #13
Avatard
Crotch Rocket Curmudgeon
 
Avatard's Avatar
 
Join Date: Nov 2008
Location: Here to integrity
Moto: Li'l red baby Ninja
Posts: 7,482
Default

Little car, big motor...best way to go fast. Just ask Carroll Shelby.

He did it with the Sunbeam Tiger AND the Cobra.

It's a thought. The kit is four grand, though...
__________________
Insert free thought here.
Avatard is offline   Reply With Quote
Old 10-31-2010, 03:00 AM   #14
TommyHotWheel
Imported from Detroit
 
TommyHotWheel's Avatar
 
Join Date: Nov 2008
Location: Michigan
Moto: 2001 Suzuki TL1000R
Posts: 989
Default

Quote:
Originally Posted by Avatard View Post
The 'Stang is sitting. The car was fucking perfect. It only needed paint. I'm so bummed it got hit. It got T-boned on the driver's side A pillar. Took out the door, the fender, and the upper ball joint....so it doesn't roll. The smack was just hard enough topside to crack the windscreen, and the footwell is pushed in a bit.

Tell the truth, maybe a good pull on the bottom of the A-pillar on a frame table, a new fender, door, and ball joint, and that thing might actually be OK again.

Unfortunately, I'm no frame expert, so I'm holding onto it for now.

I know it's a real "girl's car" to many, but the MX-5 Miata can swallow the entire drivetrain of that 'Stang ( http://www.monstermiata.com ), and MX-5s in decent rebuildable shape are going for as little as $1500 around here...so I am eying that as an option (as well as a swap of all parts to another Fox body).

If you see a nice 'Velle for cheap, lemme know...but I don't know how I'd get it back to Jersey. I've been considering getting a tow dolly, or trailer...
I'll keep an eye out...the pick and pull here has a few fox body stangs...and we have at least 2 Mustang specialist recyclers near me.
__________________

Cry Havok! And let slip the hogs of war!
TommyHotWheel is offline   Reply With Quote
Old 10-31-2010, 03:19 AM   #15
Dave
Chaotic Neutral
 
Dave's Avatar
 
Join Date: Feb 2008
Location: Cherry Hill NJ
Moto: GV1200 Madura, Hawk gt
Posts: 13,992
Default

Quote:
Originally Posted by Avatard View Post
Little car, big motor...best way to go fast. Just ask Carroll Shelby.

He did it with the Sunbeam Tiger AND the Cobra.

It's a thought. The kit is four grand, though...
wasnt it the ace before he renamed it? 4 grand is pretty painful considering you have to supply the car(s). i mean, if you were gonna dump that kind of cash might as well do a bit more and get a factory five cobra kit.
__________________
TWF Post whore #6
Dave is offline   Reply With Quote
Old 10-31-2010, 03:30 AM   #16
Avatard
Crotch Rocket Curmudgeon
 
Avatard's Avatar
 
Join Date: Nov 2008
Location: Here to integrity
Moto: Li'l red baby Ninja
Posts: 7,482
Default

Quote:
Originally Posted by Dave View Post
wasnt it the ace before he renamed it?
It was indeed; The AC Ace...and it was considered a "Girl's Car".
__________________
Insert free thought here.
Avatard is offline   Reply With Quote
Old 10-31-2010, 10:40 AM   #17
Adeptus_Minor
Hopster
 
Adeptus_Minor's Avatar
 
Join Date: Nov 2008
Location: Austin, TX
Moto: 2009 Buell 1125R
Posts: 4,743
Default

Quote:
Originally Posted by Dave View Post
i mean, if you were gonna dump that kind of cash might as well do a bit more and get a factory five cobra kit.
ah yes, they're always on my list.
__________________
“Well, obviously before; after was all gendarmes and dick stitches.”
Adeptus_Minor is offline   Reply With Quote
Old 10-31-2010, 12:31 PM   #18
goof2
AMA Supersport
 
goof2's Avatar
 
Join Date: Feb 2009
Posts: 4,756
Default

Quote:
Originally Posted by Avatard View Post
The 'Stang is sitting. The car was fucking perfect. It only needed paint. I'm so bummed it got hit. It got T-boned on the driver's side A pillar. Took out the door, the fender, and the upper ball joint....so it doesn't roll. The smack was just hard enough topside to crack the windscreen, and the footwell is pushed in a bit.

Tell the truth, maybe a good pull on the bottom of the A-pillar on a frame table, a new fender, door, and ball joint, and that thing might actually be OK again.

Unfortunately, I'm no frame expert, so I'm holding onto it for now.

I know it's a real "girl's car" to many, but the MX-5 Miata can swallow the entire drivetrain of that 'Stang ( http://www.monstermiata.com ), and MX-5s in decent rebuildable shape are going for as little as $1500 around here...so I am eying that as an option (as well as a swap of all parts to another Fox body).

If you see a nice 'Velle for cheap, lemme know...but I don't know how I'd get it back to Jersey. I've been considering getting a tow dolly, or trailer...
A Miata will also take an LS/T56 drivetrain from a Vette.When done right (suspension, brakes, diff, etc. upgraded to handle the power) and considering the work most $1,500 Miatas require I figure it will be somewhere north of $20k once it is all said and done though. I'd like to do one at some point but it isn't happening right now.

Since you already have the Mustang drivetrain it would be less but still probably in the $15k range.
goof2 is offline   Reply With Quote
Old 10-31-2010, 01:17 PM   #19
Dave
Chaotic Neutral
 
Dave's Avatar
 
Join Date: Feb 2008
Location: Cherry Hill NJ
Moto: GV1200 Madura, Hawk gt
Posts: 13,992
Default

Quote:
Originally Posted by goof2 View Post
A Miata will also take an LS/T56 drivetrain from a Vette.When done right (suspension, brakes, diff, etc. upgraded to handle the power) and considering the work most $1,500 Miatas require I figure it will be somewhere north of $20k once it is all said and done though. I'd like to do one at some point but it isn't happening right now.

Since you already have the Mustang drivetrain it would be less but still probably in the $15k range.
which again says FFV
__________________
TWF Post whore #6
Dave is offline   Reply With Quote
Old 10-31-2010, 02:00 PM   #20
goof2
AMA Supersport
 
goof2's Avatar
 
Join Date: Feb 2009
Posts: 4,756
Default

Quote:
Originally Posted by Dave View Post
which again says FFV
That depends on what a person is going to do with the car. Don't get me wrong, I really like the Cobra replicas and if I ever had way, way more money than I needed I would have a Kirkham in my garage. For those that want A/C that works well, independent rear suspension that doesn't cost thousands extra, don't want all the attention that comes with a Cobra, and most importantly want a top that goes up quickly and actually works the Factory Five probably isn't the best choice though.
goof2 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:41 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.