Go Back   Two Wheel Fix > In the Garage or Shop > Mechanical or Tech

Reply
 
Thread Tools Display Modes
Old 03-13-2009, 02:52 PM   #1
No Worries
Keyboard Racer
 
No Worries's Avatar
 
Join Date: Feb 2008
Location: Mile High City
Moto: Old Superbikes
Posts: 1,016
Default White Smoke

This happened yesterday in my Jeep, but it's interesting. I was about a half mile from my house when I saw billowing white smoke in my rear view mirror. First I cursed, because I thought I blew a head gasket. White smoke coming from the exhaust is usually antifreeze that's gotten into the cylinder.

I pulled over, about 20 feet from a Fire House. That's when white smoke started coming from under the hood. I shut off the engine, opened the hood, and clouds of white smoke billowed out. I expected the fire engines to come out, but they didn't. I brushed the smoke away and saw what happened. A heater hose got a hole that sprayed exactly on the exhaust header.

I got some duct tape and wrapped it around the hole. Luckily I also had a hose clamp to tighten around the duct tape and then drove home. I bought some heater hose and antifreeze for less than $10. I didn't have to curse after all, but it's good to stay in practice.
No Worries is offline   Reply With Quote
Old 03-13-2009, 03:35 PM   #2
smileyman
White Trash Hero
 
smileyman's Avatar
 
Join Date: Mar 2008
Location: NW Arkansas
Moto: Buell 1125R Porco Rosso Edition
Posts: 4,895
Default

It has happened to me alot. Being son of a professional mechanic I got to see and fix alot of coolant related smokiness. On time a radiator hose blew, but was held together by the hood. Once we popped the hood the hose unwound, dousing us both in screaming hot antifreeze!

Another time I didn't get a heater hose clamp on well enough. The motor ran down the road until the thermostat opened and when it did it poored out onto the exhaust headers. I always used new clamps and hose after that Just in case...
__________________

Arkriders.com
To be the best you must first be willing to risk the worst!
smileyman is offline   Reply With Quote
Old 03-13-2009, 06:39 PM   #3
p00kienrayray
dope fiend
 
p00kienrayray's Avatar
 
Join Date: Apr 2008
Location: SUNNY SOCAL
Moto: JICKSIR SICKS HUNNERD
Posts: 184
Default

its more likely that a hose would go bad than your gasket being blown.
p00kienrayray is offline   Reply With Quote
Old 03-13-2009, 11:49 PM   #4
Gas Man
Trip's Assistant
 
Gas Man's Avatar
 
Join Date: Feb 2008
Location: Imported from Detroit
Moto: 2009 HD Street Classic
Posts: 12,149
Default

That's why I hate older cars.... always somin stupid
__________________
-Chris



"Why pay somebody else to fuck up your bike?"
Run Amsoil Product
Gas Man is offline   Reply With Quote
Old 03-14-2009, 01:12 AM   #5
BobTheBiker
too much time on my hands
 
BobTheBiker's Avatar
 
Join Date: Jul 2008
Location: the northern district of god damn
Moto: 01 ZX6R, looking for more now.
Posts: 1,802
Default

Least it wasnt a major problem, and you didnt suffer serious damage. ya know?

but it IS more likely for a hose to spring a leak than a headgasket to blow(unless you're driving some old beatup ex racecar running boost.
BobTheBiker is offline   Reply With Quote
Old 03-14-2009, 02:12 AM   #6
No Worries
Keyboard Racer
 
No Worries's Avatar
 
Join Date: Feb 2008
Location: Mile High City
Moto: Old Superbikes
Posts: 1,016
Default

Here's my beater. A 76 Cherokee Chief with only 239K miles on the stock motor. Four-speed with a granny gear. Stock 1/4 inch steel plate protecting the vitals underneath. I've taken it up most of Colorado's mountain passes, to many mines, and I've pulled out a bunch of stuck vehicles with my winch. I especially like going up trails that have crunched mufflers and locking hubs strewn along them. Here it is above timberline, on the paved road going up to the summit of Mount Evans (14,260 feet):


In the 70's, when manufacturers put aluminum heads on iron blocks, blown head gaskets were very common because of the different expansion factors. Plus, I'm a pessimist.
No Worries is offline   Reply With Quote
Old 03-14-2009, 09:32 AM   #7
Gas Man
Trip's Assistant
 
Gas Man's Avatar
 
Join Date: Feb 2008
Location: Imported from Detroit
Moto: 2009 HD Street Classic
Posts: 12,149
Default

That's a bit different then what I'm saying... that's straight old school. That's back when Jeeps were Jeeps. Now they're just chrysler junk.
__________________
-Chris



"Why pay somebody else to fuck up your bike?"
Run Amsoil Product
Gas Man is offline   Reply With Quote
Old 03-14-2009, 01:26 PM   #8
No Worries
Keyboard Racer
 
No Worries's Avatar
 
Join Date: Feb 2008
Location: Mile High City
Moto: Old Superbikes
Posts: 1,016
Default

The main problem with new 4x4's is that nobody wants to take them off road. Especially rough roads. And especially if they are being leased. Plus, it can cost well over a grand to rescue a vehicle that's stuck way off road: http://www.mhjcontherocks.com/Community/Trips/1282.aspx

I'm a big believer in using-up, reusing, and recycling. If my engine blew up in the boonies, and I couldn't fix it, I would strip off the carb, distributor, and winch and haul them out. The body is half-way to rust now, so it wouldn't take too long for it to return to nature. Then I would look for another Chief. Maybe I could find one with less than 100K miles.
No Worries is offline   Reply With Quote
Old 03-14-2009, 03:47 PM   #9
BobTheBiker
too much time on my hands
 
BobTheBiker's Avatar
 
Join Date: Jul 2008
Location: the northern district of god damn
Moto: 01 ZX6R, looking for more now.
Posts: 1,802
Default

Yeah, I hear ya man. I keep reusing something until its completely used up and theres nothing but a void left. its cheaper in the long run, and I just keep finding good deals on concours motors to swap in, so I'm good with it.
BobTheBiker is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:15 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.